HELP...lost wheel lock
This sucks. Lost my wheel lock and don't have my wheel lock number code, and I'm stuck riding around with my drag radials on. Ford dealer couldn't help me. Suggestions please!
This has happen to me in the passed and i will tell you how i got mine off.
get some Wd40 spray locking lug with a litlle of it (not much and try to get it in the center where threads are, wd40 is use to losen the lock easier)
Next take a socket (1/2 drive) that you dont really care for that is just tight to go on lock.
You want it to be kinda tight because you are going to hammer it on there,so thats why I said use a socket you dont care for.
If you have a impact gun it better but if you have a breaker bar that will work also.
Now hammer socket onto lock and becarful not to hit your rim (ouch
)
Now once the socket is on ,take your impact gun or breaker bar and losen it slowly and it should come off.
if not use a smaller socket that fits tighter(if you used a standard use a milimeters) and you will get them off with patience
Ps. they do sell wheel lock remover kits http://www.afrema.com/ProductsImages...oval%20Kit.jpg which is on the same idea ,my way is cheaper
Good luck
get some Wd40 spray locking lug with a litlle of it (not much and try to get it in the center where threads are, wd40 is use to losen the lock easier)
Next take a socket (1/2 drive) that you dont really care for that is just tight to go on lock.
You want it to be kinda tight because you are going to hammer it on there,so thats why I said use a socket you dont care for.
If you have a impact gun it better but if you have a breaker bar that will work also.
Now hammer socket onto lock and becarful not to hit your rim (ouch
Now once the socket is on ,take your impact gun or breaker bar and losen it slowly and it should come off.
if not use a smaller socket that fits tighter(if you used a standard use a milimeters) and you will get them off with patience
Ps. they do sell wheel lock remover kits http://www.afrema.com/ProductsImages...oval%20Kit.jpg which is on the same idea ,my way is cheaper

Good luck
Last edited by Repzard; Jun 30, 2009 at 11:27 PM.
Thread
Thread Starter
Forum
Replies
Last Post
mungodrums
S550 2015-2023 Mustang
10
Sep 28, 2015 10:54 PM
MustangForums Editor
General Tech
0
Sep 25, 2015 06:58 PM




