97 cobra motor in 00 GT body.
11-05-2009, 01:07 AM
#62
6th Gear Member
Join Date: Feb 2006
Location: Virginia
Posts: 11,786
My ignition is fine, my computer was tuned to 30Lb an hour injectors with the 2v in and the brian crower cams. As u probably already know cobras have 24lb an hour FI's. My autometer A/F guage reads lean most of the time at idle. when i have it full throttle it reads rich as we should expect. I'll see if i can get my 30 pound injectors back, it's either that or a vacuum leak somewhere. It might also be due to an inactive egr.
I only have one clip not hooked up, and it's the sensor on top of the Fuel pressure regualtor.
I only have one clip not hooked up, and it's the sensor on top of the Fuel pressure regualtor.
11-05-2009, 01:13 AM
#63
1st Gear Member
Thread Starter
Join Date: Oct 2009
Location: Ohio
Posts: 55
11-05-2009, 02:01 AM
#64
4th Gear Member
Join Date: May 2009
Location: DFW, TX
Posts: 1,925
I wasn't going to help cause you're such a **** but whatever.
The first problem is I'm sure you used the 4v injectors. Put your 2v injectors back in and make sure you're using your maf and not the 4v maf (If you are).
Buy the boots for the 4v and swap out that stupid wiring crap you did. That's the dumbest thing I've ever seen a mustang person do. Or you can switch to GM LS1 packs but that's not cheap and since you already have your coils just use those.
Lets get some closer pictures of everything you have connected.
The first problem is I'm sure you used the 4v injectors. Put your 2v injectors back in and make sure you're using your maf and not the 4v maf (If you are).
Buy the boots for the 4v and swap out that stupid wiring crap you did. That's the dumbest thing I've ever seen a mustang person do. Or you can switch to GM LS1 packs but that's not cheap and since you already have your coils just use those.
Lets get some closer pictures of everything you have connected.
As to the original poster, have you gotten an intake tube yet? I know that mine ran like crap with out it.
11-05-2009, 10:15 AM
#65
1st Gear Member
Thread Starter
Join Date: Oct 2009
Location: Ohio
Posts: 55
The injectors have the same part number for the GT and the Cobra, so I don't see how that will affect it. The MAF for sure will goof things up.
The EGR may not cause it, but it certainly won't help it. It can screw up the O2 sensor readings and cause more fuel to be dumped in.
As to the original poster, have you gotten an intake tube yet? I know that mine ran like crap with out it.
The EGR may not cause it, but it certainly won't help it. It can screw up the O2 sensor readings and cause more fuel to be dumped in.
As to the original poster, have you gotten an intake tube yet? I know that mine ran like crap with out it.
11-05-2009, 10:34 AM
#66
6th Gear Member
Join Date: Feb 2006
Location: Virginia
Posts: 11,786
With the tune expecting different injectors that is a huge issue. Or you could always tune for the injectors that you have now but that seems fruitless since they are maxed out of peak operating range with just a few mods. If you can get the injectors back I'd say do that. Do you have a wideband?
11-05-2009, 10:41 AM
#67
1st Gear Member
Thread Starter
Join Date: Oct 2009
Location: Ohio
Posts: 55
With the tune expecting different injectors that is a huge issue. Or you could always tune for the injectors that you have now but that seems fruitless since they are maxed out of peak operating range with just a few mods. If you can get the injectors back I'd say do that. Do you have a wideband?
11-15-2009, 03:12 PM
#69
1st Gear Member
Thread Starter
Join Date: Oct 2009
Location: Ohio
Posts: 55
