4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

what would this run in the 1/4?

Thread Tools
 
Search this Thread
 
Old 07-17-2005, 07:43 PM
  #1  
DILO2001GT
I ♥ Acer
Thread Starter
 
DILO2001GT's Avatar
 
Join Date: Nov 2004
Location:
Posts: 2,781
Default what would this run in the 1/4?

a 2001 automatic GT with these mods

-315 Nitto 555R Drag Radials
-4.10 Gears
-BBK Off-Road X-pipe
-SLP loudmouth I Cat-Back
-Accufab Throttle Body
-C&L PLenum
-K&N FIPK CAI
-SLP 160* Thermostat
-Diablosport Predator Tuner
DILO2001GT is offline  
Old 07-17-2005, 07:46 PM
  #2  
steeda3
2nd Gear Member
 
steeda3's Avatar
 
Join Date: Jul 2005
Posts: 401
Default RE: what would this run in the 1/4?

every car is different and it's hard to say....An auto GT with a good driver and right condition should be running 14.0-14.1 so id say maybe low to mid 13's.
steeda3 is offline  
Old 07-17-2005, 08:57 PM
  #3  
ZW99GT
6th Gear Member
 
ZW99GT's Avatar
 
Join Date: Nov 2004
Location: Tennessee
Posts: 7,797
Default RE: what would this run in the 1/4?

Low 13's.
ZW99GT is offline  
Old 07-18-2005, 01:02 AM
  #4  
Fat Nick
I ♥ Acer
 
Fat Nick's Avatar
 
Join Date: Oct 2003
Location: Virginia
Posts: 812
Default RE: what would this run in the 1/4?


ORIGINAL: DILO2001GT

a 2001 automatic GT with these mods

-315 Nitto 555R Drag Radials
-4.10 Gears
-BBK Off-Road X-pipe
-SLP loudmouth I Cat-Back
-Accufab Throttle Body
-C&L PLenum
-K&N FIPK CAI
-SLP 160* Thermostat
-Diablosport Predator Tuner
I'd say if your a coupe, probably 13.6 or so.
Fat Nick is offline  
Old 07-18-2005, 09:30 AM
  #5  
DIVER8374
4th Gear Member
 
DIVER8374's Avatar
 
Join Date: Jan 2005
Location: Oklahoma City, Oklahoma
Posts: 1,519
Default RE: what would this run in the 1/4?

Well being that I am a auto owner too and have been to the track with mine (mods listed below) I would say that you are running a mid-high 13's. If I was to venture a guess I would say around a 13.7 or so. With my mods my fastest run is a 9.033 in the 1/8 mile wich is around a 13.8-13.9. hope this helps ya out.
DIVER8374 is offline  
Old 07-19-2005, 04:17 AM
  #6  
DILO2001GT
I ♥ Acer
Thread Starter
 
DILO2001GT's Avatar
 
Join Date: Nov 2004
Location:
Posts: 2,781
Default RE: what would this run in the 1/4?

yeah completely stock i ran a 14.29 so i was trying to figure what i would run onw. i want to head up to the track but am waiting for the N2O install sometime within a week or 2
DILO2001GT is offline  
Old 07-19-2005, 06:26 AM
  #7  
blownstanger
2nd Gear Member
 
blownstanger's Avatar
 
Join Date: Jul 2005
Location: Alice, TX
Posts: 373
Default RE: what would this run in the 1/4?

mid 13's.
blownstanger is offline  
Old 07-19-2005, 08:02 PM
  #8  
Fat Nick
I ♥ Acer
 
Fat Nick's Avatar
 
Join Date: Oct 2003
Location: Virginia
Posts: 812
Default RE: what would this run in the 1/4?

I ran 13.9 with what I have now and 14.6 stock.
Fat Nick is offline  
Old 07-19-2005, 09:17 PM
  #9  
steeda3
2nd Gear Member
 
steeda3's Avatar
 
Join Date: Jul 2005
Posts: 401
Default RE: what would this run in the 1/4?


ORIGINAL: Fat Nick

I ran 13.9 with what I have now and 14.6 stock.

Man that's terrible if you only ran a 14.6 in a 99+GT stock. Most automatics have been know to hit 14.0-14.3 and 5 speeds are in the 13.8-14.1 range... 5 speed verts are normally 13.9-14.2....See where i'm going......Unless you have an auto vert a 14.6 is pretty bad...
steeda3 is offline  
Old 07-19-2005, 09:36 PM
  #10  
devinsteen
4th Gear Member
 
devinsteen's Avatar
 
Join Date: Jul 2004
Location: San Diego, CA
Posts: 1,177
Default RE: what would this run in the 1/4?

That is actually not that bad man. The 5 speeds will not hit 13's.....I don't think anyone here has done it. Only pro driver's with excellent track conditions have broke into the 13's. Most of them will hit 14.1-14.5 stock driven properly.
devinsteen is offline  


Quick Reply: what would this run in the 1/4?



All times are GMT -5. The time now is 07:30 AM.