jn1255

Ok, I'm new and a complete noob with only basic knowledge on motor work. My car is stock with the exception of exhaust and cold air intake. I was wanting to change the cams in the car but don't know where to start. What other things must be changed in order to change the cams? I want to really notice the cams when the car is at idle but want the car to preform as an everyday driver because that is what it is.

Can somebody build me a list of parts needed and specs so that I can place a order and get the car into the shop.

Thanks so much.

mrtstang

I just did cams on my ride the other day. Nice bump in power in the upper revs with no loss down low, and they sound awesome at idle.

After countless hours of research, these are the ones i chose. I did the PI stage 2 naturally aspirated cams.

http://www.modularheadshop.com/Cams.....6%20NA%20cams