comp cam information.
#1
comp cam information.
i found these cams for a really good deal but i cant figure out which ones they are. im running full bolt ons and a 100shot zex kit. will these be good with my setup? heres some information and a link
SPECS ARE .495 in. LIFT AND 273 /277 AND @ .006. .236 / 240 @ .050 DURATION.
http://vancouver.en.craigslist.ca/rd...729797300.html
Thanks
SPECS ARE .495 in. LIFT AND 273 /277 AND @ .006. .236 / 240 @ .050 DURATION.
http://vancouver.en.craigslist.ca/rd...729797300.html
Thanks
#4
My ride is very similar to yours. Full bolt ons with a 100 shot, and i went with Modular Head Shop stage 2 cams. CMS stage 1's would also be a good choice. Both of these cams would allow you use your stock springs, and not have to worry about ptv clearance issues.
#6
Yeah, i recently did a big write up on mine. They do have a nice lope, but in this clip it's hard to hear. Plus my idle was at 950 in this clip, which is way too high IMO.
http://www.youtube.com/watch?v=njaxo_0S938
http://www.youtube.com/watch?v=njaxo_0S938
Thread
Thread Starter
Forum
Replies
Last Post
junior04
4.6L (1996-2004 Modular) Mustang
1
09-28-2015 10:53 AM