Please help me out here if you can?
08-06-2005, 05:09 PM
#1
1st Gear Member
Thread Starter
Join Date: Jul 2005
Location:
Posts: 146
Please help me out here if you can?
I have installed a dry nitrous kit (zex) 75 shot and there is two hoses that I do not know where they go, well I know where they go but There is no place to put them there? One is supposed to go to the intake plenum and the other to the fuel pressure, if you have done this before let me know where to put them please,and also where the WOT wire goes to I found the tps wires but dont know which one it uses.
Thank You,
Steve
Thank You,
Steve
08-07-2005, 08:31 PM
#3
2nd Gear Member
Join Date: Jan 2004
Location: United States
Posts: 235
RE: Please help me out here if you can?
the hose that has regulator on it goes to the top of the fuel pressure regulator. The other hose that has intake on it hooks to the red hose line you puled off the regulator but you need to take the rubber piece off the end of the red hose that originaly went to the top of the regulator.