2v sparkplug blowout fix?
06-29-2010, 04:03 PM
#12
TECH SAVANT
Join Date: Dec 2006
Location: Saint Augustine, FL
Posts: 10,938
i got a once used time sert kit in the mail from ebay right now.
i cant believe how much the ford kit cost, $485 reg. $368 new on ebay, used on ebay $200. im a tool maker so i can understand it could cost that much to make it and sell it and make profit on something that usually only used by professional mechanics, but than a pack of 10 insert cost $100. anyways ill post on how i make out with it, thanks for the help
i cant believe how much the ford kit cost, $485 reg. $368 new on ebay, used on ebay $200. im a tool maker so i can understand it could cost that much to make it and sell it and make profit on something that usually only used by professional mechanics, but than a pack of 10 insert cost $100. anyways ill post on how i make out with it, thanks for the help
07-29-2010, 04:25 PM
#13
Thread Starter
Join Date: Jun 2010
Location: Ontario
Posts: 7
thanks for the help guys! i got it fixed, took me about 2.5hours start to finish with the timesert kit, works great. it could be done in much less but its not worth getting chips in the cylinder, i would go 2.. 3 turns at the most then take the tool out clean it and repack it with grease. im now running 8psi to it and its never ran better, other than the spark plug issue, the mod. motors r just amazing!
Thread
Thread Starter
Forum
Replies
Last Post
bradleyb
Classic Mustangs (Tech)
3
11-27-2015 07:50 PM
