reno27

I Recently got a new gen mustang and i have had foxbody's since i was 16 im just curious as how much hp and torque normally do hci add on a 2v mustang and is it even worth playing around with this motor or to start building a new 4v or a possible coyote swap

mineralpony

A N/A build on a 2v is pricey and I don't think it'll yield you a lot of power. Slap on a blower and you'll get more power and it'll be cheaper.

reno27

well i looked into it and the heads cam intake is def not out of my price range but would it be worth doing the hci then supercharging or just put a blower on it and build another motor i just want to know what some guys made for power on a 2v before i even bother spending money

school boy

the blower wouldbe the quickest and cheapest. the rods in these motors only hold 400-450rwhp. a intercooled blower setup will get you to that rwhp very easy

97stanger

Like said slap a blower on with bolt ons and you are at 400+rwhp. Anything much more than that and you should start looking to forge internals. Any power adder just keep an eye on your tranny too