4.6L (1996-2004 Modular) Mustang Technical discussions on 1996-2004 4.6 Liter Modular Motors (2V and 4V) within.

e brake help!

Thread Tools
 
Search this Thread
 
Old Nov 11, 2012 | 11:58 PM
  #1  
jjstandardz's Avatar
jjstandardz
Thread Starter
1st Gear Member
 
Joined: Feb 2012
Posts: 92
From: north dakota
Default e brake help!

OK so I parked my car and put on the ebrake like normal and I came back out like an hour later and put the brake down not noticing anything until I started driving. It seemed like the brake was still on, car was very sluggish and would stop quickly like the e brake had slight resistance.

So I stopped the car and played with the e brake a little bit and noticed that it was now loose and wiggles slightly from side to side. It also doesn't catch until about 2 inches higher than before, but the car stopped acting sluggish when I drive it now like it released. Did my ebrake come loose or something? I might have pulled up on it to hard when I parked it, that's the only thing I can think of that caused it.

It also recently got cold here( about 15 degrees) and my car has been in the garage for a few days so wondering if that had something to do with it

Does anybody know of how I can fix this? I have an 02 manual gt.

Thanks!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
b8checker
Classic Mustangs (Tech)
8
Oct 8, 2015 12:55 PM
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
Oct 5, 2015 07:16 AM
guitarman376
4.6L (1996-2004 Modular) Mustang
0
Sep 30, 2015 05:54 PM
MustangForums Editor
General Tech
0
Sep 25, 2015 06:42 PM
ThatJuanStang
V6 (1994-2004) Mustangs
4
Sep 25, 2015 08:01 AM




All times are GMT -5. The time now is 11:16 AM.