Want 400 RWNP for about 1500 bucks....
#1
6th Gear Member
Thread Starter
Join Date: Aug 2007
Location: MO/ Born and raised in Louisiana
Posts: 10,696
Want 400 RWNP for about 1500 bucks....
Hey guys I was suppose to post this a couple days ago but been kinda busy (sorry johnny). If you guys read below this is what I did a couple years ago. You guys may say damn this is a lot but it's not. For the guys who are pinching there penneys this is a great alternative. The below mods were all purchased while I was deployed to Afghanistan. So beleive me this can be done! Also I am here to help as well as a couple members on the forum. Enough talking read below.
This was written a couple years ago. BTW the kit below got me at 389 RWHP but that's with a 3.60 pulley. If you drop down to a 3.48 pulley you'll hit 400 + easy and then its time for some 5.0 chasing, lol!
Vortech V1 T-Trim Head unit-700.00---- SVT Forums
Anderson Power Pipe--150.00---Corral.net
3.60 pulley--40.00---Corral.net
Tial Bov---220.00--JDsperformance
CX Rcing Intercooler (Complete kit)--210.00-- CX Racing (Ebay)
Seimens 42lb injectors--210.00--CorraL.net
HPX 05 Slot Maf--175.00--Kerns found this one for me..
Vortech mounting bracket--50.00-- Member of MF
Vortech mounting bracket hardware kit--95.00--superchargersonline
Oil Feed line--24.00--Vortech
Oil Feed Drain--24.00-- Vortech
SVT Fuel Pump-95.00-Member of MF
S/C belt--36.00---Summit Racing
NGK TR6 Plus--26.00---Auto Zone
Vortech Rib metal idler pulley ( 2.60", 6 rib)+Vortech 6 Rib Smooth Plastic Pulley (3"Lip)---85.00---JDsperformance
Stock Pulleys--30.00--- Corral.net
Total Cost: $2170.00
Didn't quite reach the $1500.00 Supercharger build but I think I did pretty good. Could have even been cheaper if I hadn't bought the Power Pipe, Tial Bov and went with smaller injectors. Any questions guys let me know..
Soldier GT
This was written a couple years ago. BTW the kit below got me at 389 RWHP but that's with a 3.60 pulley. If you drop down to a 3.48 pulley you'll hit 400 + easy and then its time for some 5.0 chasing, lol!
Vortech V1 T-Trim Head unit-700.00---- SVT Forums
Anderson Power Pipe--150.00---Corral.net
3.60 pulley--40.00---Corral.net
Tial Bov---220.00--JDsperformance
CX Rcing Intercooler (Complete kit)--210.00-- CX Racing (Ebay)
Seimens 42lb injectors--210.00--CorraL.net
HPX 05 Slot Maf--175.00--Kerns found this one for me..
Vortech mounting bracket--50.00-- Member of MF
Vortech mounting bracket hardware kit--95.00--superchargersonline
Oil Feed line--24.00--Vortech
Oil Feed Drain--24.00-- Vortech
SVT Fuel Pump-95.00-Member of MF
S/C belt--36.00---Summit Racing
NGK TR6 Plus--26.00---Auto Zone
Vortech Rib metal idler pulley ( 2.60", 6 rib)+Vortech 6 Rib Smooth Plastic Pulley (3"Lip)---85.00---JDsperformance
Stock Pulleys--30.00--- Corral.net
Total Cost: $2170.00
Didn't quite reach the $1500.00 Supercharger build but I think I did pretty good. Could have even been cheaper if I hadn't bought the Power Pipe, Tial Bov and went with smaller injectors. Any questions guys let me know..
Soldier GT
Last edited by Soldier GT; 08-11-2015 at 05:58 PM.
#3
6th Gear Member
Thread Starter
Join Date: Aug 2007
Location: MO/ Born and raised in Louisiana
Posts: 10,696
Hey bro I can piece it together but have no clue about the install. I really don't think it would be that hard though. You'll have to tack on another 750 to a grand or so for the install then 400 bucks for the tune. Well worth it!
Hey guys any questions let me know. I love MF but the best classified section is corral.net. You'll be real surprised what you can find over there.
Hey guys any questions let me know. I love MF but the best classified section is corral.net. You'll be real surprised what you can find over there.
Last edited by Soldier GT; 08-11-2015 at 06:30 PM.
#5
6th Gear Member
Thread Starter
Join Date: Aug 2007
Location: MO/ Born and raised in Louisiana
Posts: 10,696
No prob. Feels good to see another New Edger wanting to run with the big dogs. We've become a forgotten breed, lol! Once again any questions let me know guys. 1st thing I bought was the Oil feed line and Oil feed drain from Vortech. After that there was no turning back!
#7
6th Gear Member
Thread Starter
Join Date: Aug 2007
Location: MO/ Born and raised in Louisiana
Posts: 10,696
Yeah man very close. Like I said above its a litle over 1500 but decided to buy the intercooler, BOV, Power pipe etc. This is a great alternative for guys on a budget but want a little more power.
Thread
Thread Starter
Forum
Replies
Last Post
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
10-05-2015 07:16 AM