ShaneB26154

I have a data log from my 01 GT here it is I am not sure what is what but I do know the TID $53 -09 and 0A are for cylinders 9 and 10 that are just bogus since its just a V8 and that is why they are in a failed stage. But the others i am not to sure. Anyone help to be able to find the problem in my car?

oxfordgt

$00 is drive cycle- if you recently cleared codes or KAM that will come up until the cycle runs.
$12 is AIR_stat (IAC)
$09 is long term fuel trims bank 2
$0A is fuel pressure gauge

ShaneB26154

Not sure about the 09 and 0A. Those I found out where for more cylinders for scanning a V10. I dont have more than 8 that is why 09 and 0A (cylinders 9 and 10) are failed.

There are two $00 one for TID21 and TID56

oxfordgt

If you're so sure then why did you ask? I gave you the correct monitors for those codes, do what you want with it.

ShaneB26154

Chill down dude, I know a little about this yes but if I knew everything or even all the answers to my questions above I wouldn't have asked. No need to be hostile in this as I am working on complicated fix and needed input from someone who knows mode 06. Make sense?

I knew the ones for 09 and 0A already as stated above in my first post ^^^ They run a series from 00 to 0A with "A" being 10 meaning for cylinders 1 threw 10. You show or state that 0A is fuel pressure gauge?? What about my gauge, you mean the regulator perhaps? Where did your information come from?