ZZTop

Just put in new fuel pump, started for testing pressure and for a short drive. 15 minutes later it cranked but no start, no spark. I had this problem previously with an intermittent no start due to crank sensor, but this will be the 4th sensor in less than 2 years. Posted by mistake in general forum and since then it has started again fine. Any suggestions or ideas would be greatly appreciated, I am tired of not having a reliable driver.

Z28KLR

Here's a crank/no start checklist of things to go through and verify, scroll down to post #5.

http://www.allfordmustangs.com/forum.../topics/336452

b73nova

I had a crank no start, tested the spark control module it was good, tested the pick up it was good, but the distributor was full of rust and metal shavings so i replaced the whole distributor for 90 bucks, it came with cap rotor it started right up

Z28KLR

All good stuff, except these engines have no distributor.

b73nova

Oh shoot sorry i was thinking of my 95 5.0 my bad
i have a 97 4.6 and my 95