dvs_03gt

what are a good set of cams to go on a 2v 03.. as well some ported heads.
im not to big on either topics please give me some feed back.

2000GT4.6

If you have been saving for awhile (like I have) you would really be making a mistake getting heads and cams instead of a blower. Unless you can afford to do a complete rebuild, you are limited to somewhere around 300 rwhp. The bottom end just can't spin enough RPM to take advantage of the heads and cams potential.

It comes down to this. Even the BEST ported aftermarket heads (like the stage 2.5s etc) for 2vs flow like **** compared to ANY 5.0 aftermarket head. 225-230 cfm@ .550 lift?? Aftermarket 5.0 heads are running in the 300 cfm area. Thats why they can make so much power on a N/A setup.

I just went thru this myself, and decided on a blower. 425 RWHP vs 300 rwhp. There simply is no comparasion.

dvs_03gt

nice.. i just like the sound of cars with the cams sounds so icky......

code3GT

If you decide to but some heads and cams...I recommend heads from Fox Lake Racing, MPH or VT. As far as cams...VT all the way.

JoeyD

Cams- VT or COMP.
Heads- VT... im not sure about PATRIOTS.

97stanger

I'm savining up for MPH 2.5 heads and custom grind cams from MPH

M1ke

im saving up for frpp heads, some mph grind cams and some kind of blower. how long will that take me? prolly when im out college......i dont graduate high school till may lol

da boss

how much would it cost to get my heads P&P.