4.6L General Discussion This section is for non-tech specific information pertaining to 4.6L (Modular) Mustangs built from 1996 to 2004.

GOOD NEWS

Thread Tools
 
Search this Thread
 
Old Aug 8, 2007 | 07:25 PM
  #1  
BADSEED's Avatar
BADSEED
Thread Starter
3rd Gear Member
 
Joined: Jun 2006
Posts: 990
From:
Default GOOD NEWS

i got my D/R's mounted today took it out for a ride and they stick. now you guys think i can get a 13.99 next week? car on street tires ran a 14.3@96.75 with a 2.2 60ft....if i get a 1.9-2.0 I should def. hit 13.99 right
Old Aug 8, 2007 | 07:30 PM
  #2  
jrherald420's Avatar
jrherald420
5th Gear Member
 
Joined: May 2007
Posts: 4,524
From: Smyrna, TN
Default RE: GOOD NEWS

i think you might. prey to the car gods and it shall be done!!!!
Old Aug 8, 2007 | 07:38 PM
  #3  
BADSEED's Avatar
BADSEED
Thread Starter
3rd Gear Member
 
Joined: Jun 2006
Posts: 990
From:
Default RE: GOOD NEWS

ORIGINAL: jrherald420

i think you might. prey to the car gods and it shall be done!!!!
pray to god my clutch survives the night lol
Old Aug 8, 2007 | 07:39 PM
  #4  
xxkazp3rxx's Avatar
xxkazp3rxx
6th Gear Member
 
Joined: Dec 2005
Posts: 5,893
From: Florida
Default RE: GOOD NEWS

What was your 60" when you ran last time? What size/type tires did you get?

You actually should be able to shave off a good bit of time with your d/r... but like i said it depends on what your short time was before them, with the street tires... you should be able to cut atleast a 1.8 depending on the type you have...
Old Aug 8, 2007 | 07:49 PM
  #5  
BADSEED's Avatar
BADSEED
Thread Starter
3rd Gear Member
 
Joined: Jun 2006
Posts: 990
From:
Default RE: GOOD NEWS

ORIGINAL: xxkazp3rxx

What was your 60" when you ran last time? What size/type tires did you get?

You actually should be able to shave off a good bit of time with your d/r... but like i said it depends on what your short time was before them, with the street tires... you should be able to cut atleast a 1.8 depending on the type you have...
i had street tires were kinda bald i got a 2.2...i got 275/40/17's BFG D/R's cars suspention is stock including the car itself
Old Aug 8, 2007 | 07:54 PM
  #6  
jpmustanggt's Avatar
jpmustanggt
5th Gear Member
 
Joined: Apr 2005
Posts: 2,613
From:
Default RE: GOOD NEWS

Heat those bfg's up really good! Like atleast 5 seconds! Drop the tire pressure to about 12 or so and you oughta do it!
Good luck
Old Aug 8, 2007 | 08:22 PM
  #7  
Ryan86272's Avatar
Ryan86272
5th Gear Member
 
Joined: Aug 2006
Posts: 3,287
From: same as you.
Default RE: GOOD NEWS

in all these posts, Everyone says "its possible".... when just about everyone on this site runs 14.1 stock.....

Im just a shotty driver...... I think you got it... G/l be sure to keep us informed!!!
Old Aug 8, 2007 | 08:58 PM
  #8  
BADSEED's Avatar
BADSEED
Thread Starter
3rd Gear Member
 
Joined: Jun 2006
Posts: 990
From:
Default RE: GOOD NEWS

ORIGINAL: Ryan86272

in all these posts, Everyone says "its possible".... when just about everyone on this site runs 14.1 stock.....

Im just a shotty driver...... I think you got it... G/l be sure to keep us informed!!!
well mines a convertible so its about right it 150 lbs heavier theres a 1 1/2 tenth there, and i won't be doing burnouts i dont think the clutch will hold up if i start spinning bad i'll heat them up, i will be ordering a new clutch, billet flywheel, and clutch quadrant from steeda tomorrow hopefully it come by like mon. or tuesday!!!!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
HT
Carolina Regional Chapter
11
Aug 27, 2016 08:19 PM
SSRFUZZY
Members Other Vehicles
6
Jan 6, 2016 08:22 PM
mungodrums
5.0L GT S550 Tech
7
Oct 7, 2015 04:01 AM
Sparks_88
4.6L (1996-2004 Modular) Mustang
0
Sep 8, 2015 01:06 PM




All times are GMT -5. The time now is 07:09 PM.