OK, don't know if this was ever asked or not but, A stock NPI4.6L with full bolt ons:
Cold air intake
Matched BBK 75mm Plenum and TB
30LB. Injectors
Upgraded lower intake
BBK Fuel Pressure Reg.
10.5mm Taylor wires
BBK underdrive pulleys
MSD coil packs
160 deg. thermostat
NGK IRIDUM Plugs
King Cobra 10.5 clutch
BBK off road X pipe
Flowmaster Mufflers 2.5 2.5
Diablo Chip
B&M pro ripper shifter
4.10:1 Gears
Granatelli Motorsports upper & Lower control arms
Tenrai Progressive Rate Springs Drop 1.2" front 1.0" Rear
C&L MAF set for 30lb. Injectors
SC 6psig
Snow Performance Methanol Injection System
BBK Ceramic Coated Long Tube Headers
Intercooler
How much hp should it be putting to the ground?
The #'s I'm getting just don't seem to add up.

 

Why TF did you get 30 # injectors!?

 

Because I started out building the car for NOS and changed to SC.

 

Oh i gotcha. Oh i also didnt see you're blown. What kind of blower?

 

I was given a powerdyne (yuck) but it was free so I'm not complaining, but with in the next year it's getting a 4.6L stroked 5.0 forged short blockbalanced to 28 oz.8.5:1 Compressionextrude honed pi heads crower stage 4 sc cams and to top it off D1SC 18psig. I think that should do me pretty good.