4.6L General Discussion This section is for non-tech specific information pertaining to 4.6L (Modular) Mustangs built from 1996 to 2004.

exhaustt cutouts

Thread Tools
 
Search this Thread
 
Old Dec 29, 2007 | 05:32 PM
  #1  
02StangGuy's Avatar
02StangGuy
Thread Starter
4th Gear Member
 
Joined: Oct 2006
Posts: 1,183
From:
Default exhaustt cutouts

i was looking around on jegs and found these. they are really cheep but i have a few questions. first, will they go in place of my cats? i have no problem getting rid of my cats, they are gutted anyway. second, will i need any other parts to install them? am i going to gain anything/loose anything from them when i open them up? considering its pretty much like running open header, will this kill any back pressure that i would have? as long as it isnt bad for the car i think i am going to get them just for the sound.

http://www.jegs.com/webapp/wcs/store...51312_-1_11529
Old Dec 29, 2007 | 05:34 PM
  #2  
Sxynerd's Avatar
Sxynerd
6th Gear Member
 
Joined: Feb 2006
Posts: 11,786
From: Virginia
Default RE: exhaustt cutouts

Waist of time on our long stroke-little bores.... You wont get anything except a exhuast leak for your troubles.
Old Dec 29, 2007 | 05:36 PM
  #3  
02StangGuy's Avatar
02StangGuy
Thread Starter
4th Gear Member
 
Joined: Oct 2006
Posts: 1,183
From:
Default RE: exhaustt cutouts

damn. they arent even good just for the sound?
Old Dec 29, 2007 | 05:41 PM
  #4  
Sxynerd's Avatar
Sxynerd
6th Gear Member
 
Joined: Feb 2006
Posts: 11,786
From: Virginia
Default RE: exhaustt cutouts

Have you ever been next to a 4.6 with open headers? I'd rather listen to a honda with a fart can.
Old Dec 29, 2007 | 05:43 PM
  #5  
02StangGuy's Avatar
02StangGuy
Thread Starter
4th Gear Member
 
Joined: Oct 2006
Posts: 1,183
From:
Default RE: exhaustt cutouts

aha ok ok scratch that idea i guess. is there any way i could take out my mufflers and replace them with slp resonators or something? i want a different sound but dont want to get a whole new catback
Old Dec 29, 2007 | 05:48 PM
  #6  
Sxynerd's Avatar
Sxynerd
6th Gear Member
 
Joined: Feb 2006
Posts: 11,786
From: Virginia
Default RE: exhaustt cutouts

I just found a video on you tube. It actually doesn't sound bad "in the video." In person it really does sound bad.
Old Dec 29, 2007 | 06:05 PM
  #7  
ZW99GT's Avatar
ZW99GT
6th Gear Member
 
Joined: Nov 2004
Posts: 7,797
From: Tennessee
Default RE: exhaustt cutouts

ORIGINAL: sxynerd

I just found a video on you tube. It actually doesn't sound bad "in the video." In person it really does sound bad.
Those are the same ones I used.


I have 3 or 4 vids on youtube of mine with the cutouts open. It sounds cool if you have cams, at idle, but it's just a raunchy, wild, unrefined tone when revving. And the resonance is absolutely rediculous. I haven't opend mine more than 2-3 time since I got them 6 months ago.
Old Dec 29, 2007 | 06:10 PM
  #8  
01GT4.6's Avatar
01GT4.6
6th Gear Member
 
Joined: Mar 2007
Posts: 5,726
From: Slidell, Louisiana
Default RE: exhaustt cutouts

ORIGINAL: ZW99GT

ORIGINAL: sxynerd

I just found a video on you tube. It actually doesn't sound bad "in the video." In person it really does sound bad.
Those are the same ones I used.


I have 3 or 4 vids on youtube of mine with the cutouts open. It sounds cool if you have cams, at idle, but it's just a raunchy, wild, unrefined tone when revving. And the resonance is absolutely rediculous. I haven't opend mine more than 2-3 time since I got them 6 months ago.
Zach, I need a huge favor... I went to have mine put on last week and the guy said that my car was too low, could you possibly post up a pic from under the car for me and measure the height of the car?? Do you have any rubbing issues that you didn't have before them?

Mike
Old Dec 29, 2007 | 06:18 PM
  #9  
ZW99GT's Avatar
ZW99GT
6th Gear Member
 
Joined: Nov 2004
Posts: 7,797
From: Tennessee
Default RE: exhaustt cutouts

ORIGINAL: 01GT4.6

ORIGINAL: ZW99GT

ORIGINAL: sxynerd

I just found a video on you tube. It actually doesn't sound bad "in the video." In person it really does sound bad.
Those are the same ones I used.


I have 3 or 4 vids on youtube of mine with the cutouts open. It sounds cool if you have cams, at idle, but it's just a raunchy, wild, unrefined tone when revving. And the resonance is absolutely rediculous. I haven't opend mine more than 2-3 time since I got them 6 months ago.
Zach, I need a huge favor... I went to have mine put on last week and the guy said that my car was too low, could you possibly post up a pic from under the car for me and measure the height of the car?? Do you have any rubbing issues that you didn't have before them?

Mike
I'm headed out to eat supper, I'll get you a pic on the way back in later tonight!
Old Dec 29, 2007 | 09:49 PM
  #10  
ZW99GT's Avatar
ZW99GT
6th Gear Member
 
Joined: Nov 2004
Posts: 7,797
From: Tennessee
Default RE: exhaustt cutouts

As promised here's the pics. Now that I look at it, it's awful low. lol. Scrapes on speed bumps and such. don't have a whole lot of trouble tho.











All times are GMT -5. The time now is 06:55 AM.