4.6L General Discussion This section is for non-tech specific information pertaining to 4.6L (Modular) Mustangs built from 1996 to 2004.

Dyno numbers are in : )

Thread Tools
 
Search this Thread
 
Old 04-25-2008, 07:42 PM
  #1  
Ehmark
3rd Gear Member
Thread Starter
 
Ehmark's Avatar
 
Join Date: Mar 2007
Location: Ca
Posts: 891
Default Dyno numbers are in : )

I just dynoed for the first time earlier and my car did great she put down 282.3 rwhp and 274.3 rwtq . I think it went pretty well overall how about you guys?
Ehmark is offline  
Old 04-25-2008, 07:47 PM
  #2  
Andy13186
4th Gear Member
 
Andy13186's Avatar
 
Join Date: Apr 2008
Posts: 1,792
Default RE: Dyno numbers are in : )

what mods? (nm i read your sig) i havent dynoed mine, but mine is stock and i would like too, how much does it cost and how much do stock gts normally dyno at?
Andy13186 is offline  
Old 04-25-2008, 07:49 PM
  #3  
avexhype
3rd Gear Member
 
avexhype's Avatar
 
Join Date: Jul 2007
Location: Houston, tx
Posts: 665
Default RE: Dyno numbers are in : )

1996 gt with 4v swap ,Visteon racing radiator, BBK coldair, Flowmasters, Flowtech x pipe,Imrc delete,Fidanza flywheel with spec stage II and motive 4.30 gears.
282 Rwhp 274Rwtq
avexhype is offline  
Old 04-25-2008, 08:00 PM
  #4  
Ehmark
3rd Gear Member
Thread Starter
 
Ehmark's Avatar
 
Join Date: Mar 2007
Location: Ca
Posts: 891
Default RE: Dyno numbers are in : )

One dyno pull is $80 my dynotunecost $360 + 4 bank chip totally worth it for 13 rwhp : )
Ehmark is offline  
Old 04-25-2008, 08:10 PM
  #5  
Ehmark
3rd Gear Member
Thread Starter
 
Ehmark's Avatar
 
Join Date: Mar 2007
Location: Ca
Posts: 891
Default RE: Dyno numbers are in : )

Well a96-98 gt should put down 180rwhp and a 99-04 should put down 230rwhp. Multiply engine hp by .85 to get estimated rwhp for a manual trans. To find engine hp from Rear wheel divide by .85 so I should have 332 at the engine.
Ehmark is offline  
Old 04-25-2008, 11:40 PM
  #6  
96GT226410
CSMG Moderator
 
96GT226410's Avatar
 
Join Date: Mar 2006
Location: New Jersey
Posts: 3,503
Default RE: Dyno numbers are in : )

Sweet. How was the swap?
96GT226410 is offline  
Old 04-26-2008, 04:55 PM
  #7  
Ehmark
3rd Gear Member
Thread Starter
 
Ehmark's Avatar
 
Join Date: Mar 2007
Location: Ca
Posts: 891
Default RE: Dyno numbers are in : )

LOL the cobra swap was actually easier than the pi swap.It wasall easy except some of the parts are damn near impossible to find. Like the throttle cable originally $40 butI had to pay over $200.(I just dropped the cobra engine in I didnt do a 2 to 4v headswap)Im happy with it; it gets its peakhp at just over 6200 rpms.
Ehmark is offline  
Old 04-26-2008, 05:07 PM
  #8  
96GT226410
CSMG Moderator
 
96GT226410's Avatar
 
Join Date: Mar 2006
Location: New Jersey
Posts: 3,503
Default RE: Dyno numbers are in : )

Damn. Why so much for the throttle cable? No one aftermarket had them?
96GT226410 is offline  
Old 04-26-2008, 05:09 PM
  #9  
Ehmark
3rd Gear Member
Thread Starter
 
Ehmark's Avatar
 
Join Date: Mar 2007
Location: Ca
Posts: 891
Default RE: Dyno numbers are in : )

Nope nobody had one but i found it on ebay and had to ebay snipe to get it. lol
Ehmark is offline  
Old 04-26-2008, 05:43 PM
  #10  
Fobra
Banned
 
Fobra's Avatar
 
Join Date: May 2007
Location:
Posts: 4,064
Default RE: Dyno numbers are in : )

couldnt you have just made one?
Fobra is offline  


Quick Reply: Dyno numbers are in : )



All times are GMT -5. The time now is 06:12 PM.