4.6L General Discussion This section is for non-tech specific information pertaining to 4.6L (Modular) Mustangs built from 1996 to 2004.

Computer calibration code?

Thread Tools
 
Search this Thread
 
Old Apr 29, 2008 | 01:49 PM
  #1  
black35th's Avatar
black35th
Thread Starter
4th Gear Member
 
Joined: Jun 2007
Posts: 1,996
From: Ohio
Default Computer calibration code?

Ok, so I'm getting ready to order a tuner from bamachips.com and they need my calibration code, the instructions on the site say that it's in the pass. door jamb or on the pass. kick panel. I can't find it in either place......is it possible that it's actually on the inside of the kick panel? I just wanna make sure before I go rippin **** off.

Lastly, have any of you guys ever ordered tuners from bamachips? I know the guys in the 05-08 section talk VERY highly of this place and that his tunes are awesome. I was just wondering if anyone from the 99-04 world had any experience with them.
Old Apr 29, 2008 | 04:52 PM
  #2  
MoKo_04GT's Avatar
MoKo_04GT
4th Gear Member
 
Joined: Sep 2006
Posts: 1,099
From: smokelahoma city, ok
Default RE: Computer calibration code?

you have to remove the passenger kick panel to access your ecu.

your ecu code will be on a sticker/bar-code that is stuck to the actual ecu itself.

the code will consist of 3 letters and a number. for example my ecu code is RKN2.

have i ever dealt with bamachips? no.

i havent heard any bad things about them, and i know with the 05-08 guys its always a toss up between brenspeed and bamachips.

i chose brenspeed, only b/c they are ranked the number one sct tuner in the united states. bamachips is ranked well.....but they arent number one.
Old Apr 29, 2008 | 06:09 PM
  #3  
black35th's Avatar
black35th
Thread Starter
4th Gear Member
 
Joined: Jun 2007
Posts: 1,996
From: Ohio
Default RE: Computer calibration code?

Cool thanks man.

How much of a difference did you notice with a tune? And did you have all your bolt ons done before you got the tune?
Old Apr 29, 2008 | 06:29 PM
  #4  
MoKo_04GT's Avatar
MoKo_04GT
4th Gear Member
 
Joined: Sep 2006
Posts: 1,099
From: smokelahoma city, ok
Default RE: Computer calibration code?

before i got brenspeeds tune i had already finished all of my bolt ons, and didnt think i would really notice much of a difference with the tune, b/c at the time i had a "jet chip" stuck into the ecu.

well....let me tell you...i was wrong! the brenspeed tune impressed the hell out of me! especially compared to the chip/tune i had prior.

plus i like the fact that i can run brenspeeds 93 octane tune.....add a couple gallons of 101 octane (which they sell at the same "shell" i get my 93 at) , and bump up the timing even more thru the whole rpm range. haha no pinging yet, and my car runs more smoother/pulls harder now than it ever has.

im sure you can do the same with bamachips tune, as long as they use a SCT.

they are both really good, and i know you will be happy/impressed with whoever you choose. it was kind of a hard decision for me...but i dont regret going with brenspeed AT ALL.
Old Apr 29, 2008 | 06:50 PM
  #5  
black35th's Avatar
black35th
Thread Starter
4th Gear Member
 
Joined: Jun 2007
Posts: 1,996
From: Ohio
Default RE: Computer calibration code?

Sweetness! Well then I think I'm just gonna go with Brenspeed, stick with the "tried and true" company lol.

Did you order yours online or did you give them a call and tell them all of your mods and stuff? I was gonna order it online but I dont really see any place to put in mods, besides maybe the comment box or something.


Old Apr 29, 2008 | 07:07 PM
  #6  
MoKo_04GT's Avatar
MoKo_04GT
4th Gear Member
 
Joined: Sep 2006
Posts: 1,099
From: smokelahoma city, ok
Default RE: Computer calibration code?

i did it over the phone so i could tell them everything....

you'll be impressed. just gotta be patient....it takes brent like a week to write your tune, then it ships. all in all about 2 weeks. very worth the wait tho.
Old Apr 29, 2008 | 07:18 PM
  #7  
black35th's Avatar
black35th
Thread Starter
4th Gear Member
 
Joined: Jun 2007
Posts: 1,996
From: Ohio
Default RE: Computer calibration code?

Awesome man, thanks alot for the help I really appreciate it!
Old Apr 29, 2008 | 07:20 PM
  #8  
MoKo_04GT's Avatar
MoKo_04GT
4th Gear Member
 
Joined: Sep 2006
Posts: 1,099
From: smokelahoma city, ok
Default RE: Computer calibration code?

no prob at all, brother.

keep me posted, and let me know what you think of the tune, once you get it!
Old Apr 29, 2008 | 08:19 PM
  #9  
black35th's Avatar
black35th
Thread Starter
4th Gear Member
 
Joined: Jun 2007
Posts: 1,996
From: Ohio
Default RE: Computer calibration code?

Will do!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BOB ROME
5.0L (1979-1995) Mustang
3
Jul 26, 2023 01:54 PM
mrtrodonet
V6 (1994-2004) Mustangs
3
Sep 19, 2020 03:12 PM
lincolnshibuya
V6 (1994-2004) Mustangs
9
Dec 8, 2015 04:37 PM
Dathan
V6 (1994-2004) Mustangs
4
Oct 5, 2015 05:52 AM
ChampInSD
5.0L GT S550 Tech
13
Oct 2, 2015 04:55 AM




All times are GMT -5. The time now is 01:33 AM.