Hey Guys,

Got a few questions about my 2000 Mustang Vert. I just got it and I am looking to upgrade a bit and had some questions about exhaust and tires. The car is completely stock right now.

First is wheel size. 18x9 Front and 18x10 back? I believe that is standard for upgrade. My question is what size tires should I put on? What is the widest I can go on a 10 inch wheel?

I am thinking 265 front and 305 back? Is that possible? Also what about sidewall width? I would prefer something more on the low profile side.

Also what do you guys think about a catted H and Borla Stingers? I can't find any sound clips. I will have stock headers.


Thanks guys! Any advice is much appreciated!


-Mike

 

Borla Stingers + catted H = SICKNESS!!!!!!....Here's one clip I found of this combo. I'll try to find some more.
http://www.youtube.com/watch?v=LWcskI0pHHw

Let me know what you think of the clip...

And if you want louder than that....You could always go with an O/R X or H pipe.

 

Here's a clip of Borla Stingers with an o/r x pipe....

http://www.youtube.com/watch?v=Uzd56ke4sz8

Same car but he lets off and gets back on it....
http://www.youtube.com/watch?v=G_LUZ5LFRwk

Let me know what ya think man...

 

i would go with 10.5 in the rear if you are going to put a 305 on, you can actually step up to a 315 with that wide af a wheel, as far as exhaust im a big fan of magnaflow, i have highflow cats with a built in x plus a cat back, nice and throaty at idle and cruise, and she roars pretty good under load, all this with no droan.

 

Dont go with a 10.5, forcefeed your wrong, it will be too big for 305 and it would look tacky, 10 in is just perfect for 315. If you go with 10.5 then i would get 325's minimum in the back. The widest is 325mm on a 10 inch rim but it wont look to good IMO. The side wall bulge out the side of the rim... im very picky because i worked at a tire shop, As for low profiles, here is my set up, Front: 275/35/18 Rear: 315/30/18. Those are nice and low profile. Exhaust, i say internet clips will never give you the idea of sound that you will see in person IMO.

 

+1 on the Magnaflow as well! Borla Stingers or Magnaflow...you can't go wrong with those two choices.

I've got a Magnaflow catback side exhaust with an o/r x pipe on my ROUSH and love it! Of course it's gonna be a different with my side exhaust....but it's gonna sound sick either way.

 

dude how can i be wrong, its simply my opinion, if you would like to see what it looks like i can email you some pics, apparently i cant post them i haven't been a member long enough

 

can't leave out the SLP lm2 plug

SLP lt headers, x-pipe and lm2

 

I just got my MAC longtubes, MAC o/r prochamber, and borla stingers. I cant wait to get them on. If you youtube "prochamber borla", there is one of a guy with MAC longtubes, catted prochamber and stingers. its sounds really good. the car is silver in the video im talking about. part of why i went with the setup i chose.

 

for the front 265/35/18 are perfect I would not go any wider in the front if you are staggering them.