460 build thread
5th Gear Member
Joined: Jan 2008
Posts: 2,583
From: HENDO,KY
2nd Gear Member
Joined: Jan 2010
Posts: 177
From: ohio
lets check hood clearance
looks close
plenty of room for a super charger hat
inside back to together
back on the floor
stance check
yes i know the tires need aired up
more on this tomorrow. got some video pulling it out and turning it around, but the camera man failed to work the camera correctly...
looks close
plenty of room for a super charger hat
inside back to together
back on the floor
stance check
yes i know the tires need aired up
more on this tomorrow. got some video pulling it out and turning it around, but the camera man failed to work the camera correctly...
Thread Starter
aka 'Negative Nancy'
Joined: Jul 2007
Posts: 4,839
From: Ohio
camera man didnt fail at nothing... mechanic man failed at adding enough fluid to actually make it move in reverse, hence the camera guy shutting off the video lol
actually, my chinabay dipstick is hard to read so we couldnt tell how much fluid was in the trans...so we got it out there and it didnt have reverse lol...needs about 3 more qts of fluid...but heres a teaser vid
http://s5.photobucket.com/albums/y19...t=100_5368.flv
actually, my chinabay dipstick is hard to read so we couldnt tell how much fluid was in the trans...so we got it out there and it didnt have reverse lol...needs about 3 more qts of fluid...but heres a teaser vid
http://s5.photobucket.com/albums/y19...t=100_5368.flv
Last edited by 99BlackPonyGT; Feb 24, 2010 at 07:49 AM.
6th Gear Member
Joined: Jan 2008
Posts: 6,395
From: colorado