grogan

how hard would it be to do urself. i dont have any of the tools to remove the cams, etc. what would i need and and recommendations on what cams to go with.

im still sitting on the stock bottem end but i want the biggest and baddest cam i can get to go with my blower.

CAMDUP

anderson cam chain retention tool = no problem !

http://www.andersonfordmotorsport.com/

grogan

is that so u dont have to remove the front cover? i want that lol

CAMDUP

u got it !!....its an awsome tool !!

grogan

i didnt check the site how much does that run?

devongarver

i cnat find the part on their website...i suck lol

devongarver

nvm i jsut found it. 30$ do the 99-00 have removable cam gears too?

ddmsgtr1

If you really want the biggest baddest cam for your blower, you might as well get a new longblock. The fact is without descent heads, your wasting that cam, and I have a pretty good feeling you might run into PTV clearance issues. You also might be pushing the safety limit for your internals. As for badass blower cam, check out the CMS Stage 3's.

SVTeeshirt

as you pointed out without touching the internals those cams will more than likely push him past the limits of the stock internals, not to mention will require valvesprings and possibly a port to be used to full capacity, which would put him past the limits of the internals.

honestly i'd start building a shortblock.

grogan

shortblock is coming in winter. i just wanted to add more power now lol im used to what i have now and my stepdad has a 600 hp corvette making my car feel small.