Dyno video
05-20-2009, 04:04 PM
#21
3rd Gear Member
Join Date: Aug 2008
Location: Oklahoma
Posts: 912
05-21-2009, 08:01 AM
#25
3rd Gear Member
Join Date: Mar 2006
Location: West Virginia
Posts: 563
Congrats. I was doing about same thing with the same setup. S-trim rr 2.8" pulley stock heads intake and exhaust manifilds. My numbers were 431/419.
I dropped in a set of houston performance s292 cams using a cam retention tool. No degreeing and stock valve springs in about 3 hours. I also installed lt's. I put out 516/453 with just a retune. I averaged 128 traps and on a cold day did a 11.1 @ 129 and had a best trap of 130.69.
Are you running a cheap ebay cooler like me? They can be pretty restrictive. But mine cooled the intake temps better than most.
I dropped in a set of houston performance s292 cams using a cam retention tool. No degreeing and stock valve springs in about 3 hours. I also installed lt's. I put out 516/453 with just a retune. I averaged 128 traps and on a cold day did a 11.1 @ 129 and had a best trap of 130.69.
Are you running a cheap ebay cooler like me? They can be pretty restrictive. But mine cooled the intake temps better than most.
Last edited by jivepepper; 05-21-2009 at 08:05 AM.
05-21-2009, 08:32 AM
#26
5th Gear Member
Join Date: Aug 2006
Location: same as you.
Posts: 3,287
Congrats. I was doing about same thing with the same setup. S-trim rr 2.8" pulley stock heads intake and exhaust manifilds. My numbers were 431/419.
I dropped in a set of houston performance s292 cams using a cam retention tool. No degreeing and stock valve springs in about 3 hours. I also installed lt's. I put out 516/453 with just a retune. I averaged 128 traps and on a cold day did a 11.1 @ 129 and had a best trap of 130.69.
Are you running a cheap ebay cooler like me? They can be pretty restrictive. But mine cooled the intake temps better than most.
I dropped in a set of houston performance s292 cams using a cam retention tool. No degreeing and stock valve springs in about 3 hours. I also installed lt's. I put out 516/453 with just a retune. I averaged 128 traps and on a cold day did a 11.1 @ 129 and had a best trap of 130.69.
Are you running a cheap ebay cooler like me? They can be pretty restrictive. But mine cooled the intake temps better than most.
05-21-2009, 08:55 AM
#27
3rd Gear Member
Join Date: Mar 2006
Location: West Virginia
Posts: 563
Yep, my best trap in similar conditions before was a 121 so I know the increase was real. I highly doubt you'll see 600 with stock heads and na cams.
Last edited by jivepepper; 05-21-2009 at 08:58 AM.
05-21-2009, 10:01 AM
#28
Underboss
Thread Starter
Join Date: Jan 2006
Location: Helaware
Posts: 20,273
05-21-2009, 10:08 AM
#29
3rd Gear Member
Join Date: Mar 2006
Location: West Virginia
Posts: 563
