Strut Tower Brace FTW!
05-20-2009, 01:34 PM
#5
5th Gear Member
Thread Starter
Join Date: Nov 2007
Location: Georgia
Posts: 4,286
05-20-2009, 02:37 PM
#7
4th Gear Member
Join Date: Feb 2007
Location: Austin, TX
Posts: 1,139
^ MM
Did you end up getting all the bolts in? I didn't end up putting the ones against the firewall on because the flange is about 1/4" from even touching the firewall and it needed to go down slightly to line up.
Did you end up getting all the bolts in? I didn't end up putting the ones against the firewall on because the flange is about 1/4" from even touching the firewall and it needed to go down slightly to line up.
05-20-2009, 02:48 PM
#8
5th Gear Member
Thread Starter
Join Date: Nov 2007
Location: Georgia
Posts: 4,286
i got all but one on the firewall.. i just drilled it wrong and it was already rock solid
05-20-2009, 06:03 PM
#9
6th Gear Member
Join Date: Oct 2006
Location: Texas
Posts: 10,551
I would love to design and prototype a single bar for our cars. I cant for the life of me understand how bolting to the firewall(a stupidly thin piece of metal) would provide any support laterally or vertically.
I bet I could come up with something... AutoCAD away!!
I bet I could come up with something... AutoCAD away!!
05-20-2009, 06:31 PM
#10
5th Gear Member
Thread Starter
Join Date: Nov 2007
Location: Georgia
Posts: 4,286
honestly i dont know why either, i would suspect just for stabilization... it was super easy to put everything on, so i wasnt worried about it anyway.... **** i just remembered i forgot to connect my windshield wiper fluid back