4.6L General Discussion This section is for non-tech specific information pertaining to 4.6L (Modular) Mustangs built from 1996 to 2004.

Supercharging Questions

Thread Tools
 
Search this Thread
 
Old 08-08-2010, 02:19 PM
  #1  
sstang02
Thread Starter
 
sstang02's Avatar
 
Join Date: Aug 2010
Location: Illinois
Posts: 3
Default Supercharging Questions

Hey guys i have a 02 gt and was really interested about supercharing it. I read that the eaton m90 could be a possibility. I was wondering if anyone knew if this was possible and what would be needed. I know i would need probally new lower manifold, fuel pump, injectors. Or if you any other suggestions about supercharging please let me know. Thanks
sstang02 is offline  
Old 08-08-2010, 02:39 PM
  #2  
Kerns
4th Gear Member
 
Kerns's Avatar
 
Join Date: Dec 2008
Location: Tulsa, OK
Posts: 1,478
Default

M90 i'm pretty sure is what 94-98 V6 Mustangs put on their cars. As far as I know, you can't, nor would you want to, put that blower on our cars.
Kerns is offline  
Old 08-08-2010, 03:43 PM
  #3  
mrtstang
6th Gear Member
 
mrtstang's Avatar
 
Join Date: Jan 2007
Location: MI
Posts: 5,884
Default

If it were me i'd do a Kenne Bell hands down. In fact if i find a good deal i'm probably going to do it. Don't know about the Eaton M-90 on our cars.
mrtstang is offline  
Old 08-08-2010, 04:30 PM
  #4  
boduke0220
6th Gear Member
 
boduke0220's Avatar
 
Join Date: Mar 2007
Location: Yadkin, Nc
Posts: 5,183
Default

if you want an eaton atleast get a tork tech kit
boduke0220 is offline  
Old 08-08-2010, 08:11 PM
  #5  
Hangwire
4th Gear Member
 
Hangwire's Avatar
 
Join Date: Jul 2008
Location: NC
Posts: 1,956
Default

Originally Posted by sstang02
Hey guys i have a 02 gt and was really interested about supercharing it. I read that the eaton m90 could be a possibility. I was wondering if anyone knew if this was possible and what would be needed. I know i would need probally new lower manifold, fuel pump, injectors. Or if you any other suggestions about supercharging please let me know. Thanks
The intake manifold needed to do this setup costs around $2,200 there is no way around that. With that much money you are much better off getting a vortech kit instead of the heat soaked M90.
Hangwire is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
chrisdbassplayer
2010-current S197 Appearance Section
4
10-13-2015 06:53 PM
treesloth
New Member Area
4
09-28-2015 07:03 AM
col2560
V6 (1994-2004) Mustangs
3
09-25-2015 08:59 PM



Quick Reply: Supercharging Questions



All times are GMT -5. The time now is 03:42 PM.