Dyno video!
11-23-2010, 09:26 PM
#1
4th Gear Member
Thread Starter
Join Date: Apr 2009
Location: Cleveland, TN
Posts: 1,250
Dyno video!
Ok so, after everyone recommended Gear Heads in Arlington I decided to try and stop in when picking up my car from Dallas. I went in early in the morning with no appointment and ask to do 3 pulls to check my email tune. They said no problem and quickly got it on! First pull was horrible rich at like 10.1 and only 335 hp with curves all over the place!
The guy doing the pulls said that is Travis (owner) had time he could ask him to tune it for me. I told him I was using sniper software and didn't have my interface box. He said no problem and went to the office. Came back and said Travis could squeeze me in for 350.00 bucks. I said let's do it. Travis was very nice and did a very good job of explaining everything. When I got the car to them form the shipping service the cel had come on and I could smell burning rubber from the belt so that belt may have lost me some PSI as it may be going bad. It's a motocraft belt after all!
On the last pull the car made 375hp and 380tq and was only showing 7.5 psi!
Vidoe shot in 720p on Iphone 4 lol. So click HD!
YouTube - 2001 Mustang GT Vortech Cams dyno
The guy doing the pulls said that is Travis (owner) had time he could ask him to tune it for me. I told him I was using sniper software and didn't have my interface box. He said no problem and went to the office. Came back and said Travis could squeeze me in for 350.00 bucks. I said let's do it. Travis was very nice and did a very good job of explaining everything. When I got the car to them form the shipping service the cel had come on and I could smell burning rubber from the belt so that belt may have lost me some PSI as it may be going bad. It's a motocraft belt after all!
On the last pull the car made 375hp and 380tq and was only showing 7.5 psi!
Vidoe shot in 720p on Iphone 4 lol. So click HD!
YouTube - 2001 Mustang GT Vortech Cams dyno
11-24-2010, 07:53 AM
#5
What do you expect? Everyone has been coming in here saying they were not too thrilled with the numbers. You're not intercooled and you're running a 3.6" pulley. What's helping you is your cams. If you wanted more power, you'd have to have an intercooler and a smaller pulley to make up for the boost loss. You've got more power than your street tires on 8" wheels can handle. But get a new belt and see if that helps out at all.
11-24-2010, 09:40 AM
#8
4th Gear Member
Join Date: Jul 2006
Location: Phoenix
Posts: 1,035
Nice car and good numbers regardless! Seems like some cool guys at that shop, it's always good to find someone like that.
On a side note that iPhone camera isn't bad at all, I'm going to have to switch when it comes to Verizon
On a side note that iPhone camera isn't bad at all, I'm going to have to switch when it comes to Verizon
11-24-2010, 09:58 AM
#9
4th Gear Member
Thread Starter
Join Date: Apr 2009
Location: Cleveland, TN
Posts: 1,250
Thanks guys! I probably won't go intercooled for a while. If anything I will eventually go with a snow performance meth kit to replace this dinky AFM. But Travis said the AFM was actually working great and was suprised lol. I may end up doing a 3.33 pulley and a BAP. Then one day FMIC. My intake temps looked really good he said 
I also am almost ready to buy some 18x9 and 18x10 gloss black saleens with some 295/35/18 tires out back to help me put the power down!
I also am almost ready to buy some 18x9 and 18x10 gloss black saleens with some 295/35/18 tires out back to help me put the power down!
