When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I voted Street Lites as I am biased to them as that is what I have. As amazing as they look they are a major PITA to setup for drag racing as the valve stem holes do not accomodate running tubes in your slicks worth a SHTI. But if I were able to do over again I would not run tubes anyway and just add air occasionally.[IMG][/IMG]
I also needed 3/8" spacers on the front and had to do some minor grinding on the caliper bracket. 1/2" spacers would have avoided this grinding, but it was 5 mins worth of grinding.