4.6L General Discussion This section is for non-tech specific information pertaining to 4.6L (Modular) Mustangs built from 1996 to 2004.

Help Building Ultimate Sleeper Stang?

Thread Tools
 
Search this Thread
 
Old Feb 18, 2012 | 02:10 PM
  #1  
Sleeper98's Avatar
Sleeper98
Thread Starter
 
Joined: Feb 2012
Posts: 1
From: Arizona
Exclamation Help Building Ultimate Sleeper Stang?

Hey I have a 98GT, only mods on exterior are being lowered 1.5" and having 2004 mustang Bullitt Wheels

Specs:
dynoed at 296hp and 337 ft lb of torque

The other day I ran a 12.35 at 111mph 1/4
Mods:
Pi swap with Stage 2 cam
3.73s
Pro tune

I currently have not done anything to the exhaust
Im looking to add something with a deep aggressive tone, nothing too loud
Anyone know any exhaust systems that are deep more than loud?

And what other mods should I add to the engine to for a faster 1/4 if I start getting too much faster I heard Im going to need a cage anything under 11.99 so just give me any ideas that come across you to make this the ultimate sleeper.

All replys are appreciated thanks!
Old Feb 18, 2012 | 02:54 PM
  #2  
CobraFrenzy's Avatar
CobraFrenzy
3rd Gear Member
 
Joined: Aug 2010
Posts: 791
From: PA
Default

Catted mid pipe with magnapacks would be a good choice I think
Old Feb 18, 2012 | 02:57 PM
  #3  
kugzgt's Avatar
kugzgt
5th Gear Member
 
Joined: Jul 2009
Posts: 2,472
From: Lehigh Valley, PA
Default

just out of curiousity, what cams and suspension do you have that you ran a 12.35 @111 with 3.73s
Old Feb 18, 2012 | 02:57 PM
  #4  
MCxQubed's Avatar
MCxQubed
5th Gear Member
 
Joined: Oct 2008
Posts: 2,173
From: New Jersey
Default

maybe sss adrenalines or borla stingers
Old Feb 18, 2012 | 04:51 PM
  #5  
Soldier GT's Avatar
Soldier GT
6th Gear Member
 
Joined: Aug 2007
Posts: 10,688
From: MO/ Born and raised in Louisiana
Default

Originally Posted by Sleeper98
Hey I have a 98GT, only mods on exterior are being lowered 1.5" and having 2004 mustang Bullitt Wheels

Specs:
dynoed at 296hp and 337 ft lb of torque

The other day I ran a 12.35 at 111mph 1/4
Mods:
Pi swap with Stage 2 cam
3.73s
Pro tune

I currently have not done anything to the exhaust
Im looking to add something with a deep aggressive tone, nothing too loud
Anyone know any exhaust systems that are deep more than loud?

And what other mods should I add to the engine to for a faster 1/4 if I start getting too much faster I heard Im going to need a cage anything under 11.99 so just give me any ideas that come across you to make this the ultimate sleeper.

All replys are appreciated thanks!
Wow man those are some nice numbers for the mods you have.. Low 12's that's awesome! You must be one helluva driver!
Old Feb 18, 2012 | 05:41 PM
  #6  
2000VertGT's Avatar
2000VertGT
1st Gear Member
 
Joined: May 2009
Posts: 127
From: Florida/Born and Raised West Virginia!
Default

If you want a sleeper then I would go with flowmaster hushpowers or something.
Old Feb 18, 2012 | 05:55 PM
  #7  
WannaBeGearHead's Avatar
WannaBeGearHead
Go Texas!!!
 
Joined: Jul 2009
Posts: 4,613
From: Lincoln, NE
Default

My regular Magnaflow mufflers were very quiet.
Old Feb 18, 2012 | 07:01 PM
  #8  
dwtjr3's Avatar
dwtjr3
5th Gear Member
 
Joined: Feb 2010
Posts: 2,758
From: PA
Default

Originally Posted by kugzgt
just out of curiousity, what cams and suspension do you have that you ran a 12.35 @111 with 3.73s
Im wondering this too, 111 for just PI swap and cams is a great trap speed
Old Feb 18, 2012 | 07:02 PM
  #9  
dwtjr3's Avatar
dwtjr3
5th Gear Member
 
Joined: Feb 2010
Posts: 2,758
From: PA
Default

And if u want a ultimate sleeper car, build a motor and do a v2 si trim blower and put a 200 shot on top of it, hide the shot and most people will just think your a blower car till u flip the switch. Haha
Old Feb 18, 2012 | 08:23 PM
  #10  
PurpleIcedGT's Avatar
PurpleIcedGT
6th Gear Member
 
Joined: Aug 2009
Posts: 6,028
From: New Jersey
Default

I call bullshlt. Do you even own a mustang? Where is the timeslip ?



All times are GMT -5. The time now is 08:06 AM.