HID problems...
#1
HID problems...
Ok so I've had these HIDs in my car for about a year now and have been having issues with them since i put em in and I'm just now getting tired of it lol.
1. When I flip my "brights" on it's my dims and vis versa...not really a problem just kinda annoying.
2. When I turn my headlights on sometimes the drivers side headlight doesn't come on, but after turning it on and off like twice it will come on? What could that be realated to?
Any input would be great...my dad's got my car at home while I'm at school and wants to get to work on it so I told him you guys could help me out!
Thanks boys!
1. When I flip my "brights" on it's my dims and vis versa...not really a problem just kinda annoying.
2. When I turn my headlights on sometimes the drivers side headlight doesn't come on, but after turning it on and off like twice it will come on? What could that be realated to?
Any input would be great...my dad's got my car at home while I'm at school and wants to get to work on it so I told him you guys could help me out!
Thanks boys!
#2
1. When I flip my "brights" on it's my dims and vis versa...not really a problem just kinda annoying.
Don't understand this question, if the headlights are dimming then it may be the ballasts since they regulate/convert current for the bulbs. If interior dome lights/dash lights are dimming you may be running a cheap kit thats drawing too much power through the lines to activate the magnet or the second bulb depending on how your high beams are setup.
2. When I turn my headlights on sometimes the drivers side headlight doesn't come on, but after turning it on and off like twice it will come on? What could that be realated to?
Possibly bad/failing igniter and or loose wires.
Don't understand this question, if the headlights are dimming then it may be the ballasts since they regulate/convert current for the bulbs. If interior dome lights/dash lights are dimming you may be running a cheap kit thats drawing too much power through the lines to activate the magnet or the second bulb depending on how your high beams are setup.
2. When I turn my headlights on sometimes the drivers side headlight doesn't come on, but after turning it on and off like twice it will come on? What could that be realated to?
Possibly bad/failing igniter and or loose wires.
#3
With the Hi beams/low Beams I can't say.. Mine are just on.
But with the driver side not wanting to fire up, mine used to do it too.. go through check your grounds, and plugs.. mine turned out to be a plug that didnt completely "snap" over the little nipple, because the nipple allowed the fingers of the plug to slide upwards and become loose. So I had to do some massaging on the fingers with a pair of dikes to it would stay nice and tight.
But with the driver side not wanting to fire up, mine used to do it too.. go through check your grounds, and plugs.. mine turned out to be a plug that didnt completely "snap" over the little nipple, because the nipple allowed the fingers of the plug to slide upwards and become loose. So I had to do some massaging on the fingers with a pair of dikes to it would stay nice and tight.
#4
In the first question what I'm meaning is that when i flip my brights on and it shows it on my dash, its my dims, and when I turn my brights off, it goes to my high beams. Its like they're flip flopped.
#5
For the flickering/not firing light, #2 still applies.
#6
thats because they are flip flopped, the kit you have is an international kit, the wires for your low beam and high beam will need to be swapped. Swap the two power wires on the blue plug and that should fix that issue.
For the flickering/not firing light, #2 still applies.
For the flickering/not firing light, #2 still applies.
+
get a relay harness.
Thread
Thread Starter
Forum
Replies
Last Post
Diode Dynamics
Vendor For Sale / Group Buy Classifieds
28
05-26-2022 12:02 PM
inyadreems
Archive - Mustangs For Sale
2
08-21-2015 09:10 AM
stangmods.com
Vendor For Sale / Group Buy Classifieds
121
03-09-2009 01:18 PM