What Will it Make?
11-27-2012, 08:18 PM
#1
4th Gear Member
Thread Starter
Join Date: Dec 2008
Location: Tulsa, OK
Posts: 1,478
What Will it Make?
Okay ladies and gentlemen, my car is finally being finished and tuned this week so as per the custom of this board... Time to guess what numbers the car will put down. Mods are as follows:
Teksid Block bored .020 over, 18cc Manley pistons, MMR900 rods, ARP2000 rod bolts, forged cobra crank, Clevite H series rod/main bearings, ARP main studs, ARP side bolts, Melling billet steel oil pump, Patriot Performance stage 2 heads, Modular Head Shop stage 2 turbo cams, Edelbrock Victor Jr. Intake, 6061 Plenum, Accufab 75mm throttle body, On3 forward facing 2v turbo kit with a 4" Intercooler, Precision 6780 turbo running 20-23psi, viper spec T56 transmission, aluminum driveshaft, Ram RTrack900 clutch, Aluminum Flywheel, 80lb Injectors, Magnafuel 625 fuel pump, return style fuel system, MMR sumped tank, E85 fuel.
Teksid Block bored .020 over, 18cc Manley pistons, MMR900 rods, ARP2000 rod bolts, forged cobra crank, Clevite H series rod/main bearings, ARP main studs, ARP side bolts, Melling billet steel oil pump, Patriot Performance stage 2 heads, Modular Head Shop stage 2 turbo cams, Edelbrock Victor Jr. Intake, 6061 Plenum, Accufab 75mm throttle body, On3 forward facing 2v turbo kit with a 4" Intercooler, Precision 6780 turbo running 20-23psi, viper spec T56 transmission, aluminum driveshaft, Ram RTrack900 clutch, Aluminum Flywheel, 80lb Injectors, Magnafuel 625 fuel pump, return style fuel system, MMR sumped tank, E85 fuel.
11-28-2012, 08:49 AM
#5
4th Gear Member
Thread Starter
Join Date: Dec 2008
Location: Tulsa, OK
Posts: 1,478
11-29-2012, 07:43 AM
#10
4th Gear Member
Thread Starter
Join Date: Dec 2008
Location: Tulsa, OK
Posts: 1,478
If it makes you feel any better I have been slowly working on this build for the last 2 years. So it wasn't like I got to just do it all at once. As a quick update, the motor went in last night. Hopefully by Sunday it will all be done.