I have H&R Super sport lowering springs on my 99 vert. The car was lowered 2 inches in the front (as advertised) and 1.5 in the rear (as advertised). The front was lowered perfect, but the rear left a little more to be desired.

My question for you guys is, what's a good way (besides buying other springs) to drop my rear .5 inch to 1 inch more. I want that snug look on the rear. I was thinking having a shop professionally cut a loop off the coil, but Im not sure what that would do for my ride confort. Suggestions!?

I have 18in 10.5 FR500's deep dish wheels if that matters

 

remove the isolaters .. Should loose .5 in

 

keep isolators on, take springs out - that should do the trick

 

Cut 5 coils

 

Couple dead hookers in the trunk should do it.

 

Moar fat chicks

 

Bag the b**** meow