Forged Internals.
08-04-2006, 04:07 AM
#1
5th Gear Member
Thread Starter
Join Date: Jul 2006
Location: New Orleans
Posts: 4,491
Forged Internals.
Just wondering if anyone has experience with buying forged internals for their 05+ GT. Whose got the best quality, prices, etc. I'm planning on TONS of boost in the future, and I want to do it right (this time, lol).
08-04-2006, 02:23 PM
#2
I ♥ Acer
Join Date: Aug 2006
Location:
Posts: 1,527
RE: Forged Internals.
Price and qaulity aren't always with the same product...lol
The best piston choice (and most expensive BTW) seems to be the JE ceramic coated pistons.
The best rods of choice seem to be the Manly or Eagle
The best crank of choice is hands down the cobra
If you plan on supporting a lot of mods, then you'll also need to look into the valve train. Specifically, valves, springs, & seats.
The best piston choice (and most expensive BTW) seems to be the JE ceramic coated pistons.
The best rods of choice seem to be the Manly or Eagle
The best crank of choice is hands down the cobra
If you plan on supporting a lot of mods, then you'll also need to look into the valve train. Specifically, valves, springs, & seats.
08-07-2006, 07:03 PM
#3
5th Gear Member
Thread Starter
Join Date: Jul 2006
Location: New Orleans
Posts: 4,491
RE: Forged Internals.
So many views and so little replys. [&o] Anyway, I checked around and the only forged rotating assembly I could find for my car was from Sean Hyland. I'm not saying anything bad about him, because I have no personal experience, but from reading through threads on several mustang boards, I'm noticing a trend that many people think his customer service leaves a lot to be desired. Anyone have good experiences to report? How about other sources for a forged rotating assembly?
08-07-2006, 07:22 PM
#4
Join Date: Mar 2006
Location: Bakersfield, CA
Posts: 21
RE: Forged Internals.
Livernois Motorsports also offers a kit that includes all the things you'd need to beef up your bottom end. http://www.livernoismotorsports.com/...ing+Assemblies
08-08-2006, 01:06 AM
#6
2nd Gear Member
Join Date: May 2006
Location:
Posts: 234
RE: Forged Internals.
Here is some companys that i have found that offer 3v rotating assemblys and short/long blocks:
http://www.coasthigh.com/Assemblies/Ford/ford_4_6.htm Home of the 5.1L stroker
http://www.dssracing.com/ Good engine builder from what I hear
http://www.boss330racing.com/Default.aspx?tabid=160 This link works for me but the site is messed up I think...But i believe there are some guys on this board who have some of there products on/in their cars....
Hope this helps
08-08-2006, 02:27 AM
#7
2nd Gear Member
Join Date: Jul 2006
Location:
Posts: 441
RE: Forged Internals.
D.S.S. is top notch, pretty much what everone I know has gone with...but keep in mind, there are mass productin builders like D.S.S. and Coast High Performance and then there are more custom builder like Kim Bare Racing (out of Dallas)...Kim Bare sits down with you talks to you about what you want, builds it, dyno's the motor for you and breaks it in.
D.S.S. has a layaway program...pretty cool!!!!!!!!!!!!!
D.S.S. has a layaway program...pretty cool!!!!!!!!!!!!!
