s197richie

damn dude our cars have almost the same mods list except you have the strut tower bar and I have the rear ca's... and I have the hurst...but I do have the 14" shorty, just didn't put it in my sig (guess it is weight reduction mod, technically)

rravolt

i have lca's uca's steeda sport springs but am only installing rears driveshaft and gt500 tb what now lol did you notice a big difference in with the ca

s197richie

yes, big difference...wheel hop = gone. BTW you know you need an adj upper ca for your 1 pc ds right? It will bolt in without one but the pinion angle will be wrong and you'll stress the rear end. But yeah, before the ca's, any clutch drop below 4K rpm would shake the car apart.

rravolt

i thought you only needed adj lca's not uca's i got the adj lca's with the non adj uca's as per my reading in another thread which right now i cant find but later on tonight i will post in this thread which one it was in if it is wrong please let me know so i can order the adj uca's and send the other ones back i have some time cus im not having them installed as soon as i get them thanks s197richie

s197richie

every discussion I've ever been in on this forum re: 1 pc ds says you'll need an adj upper...the adj lowers are not required, but if you have em sittin in a box, might as well bolt em up, you may need the adjustment sometime down the road...but yes you'll need an adj uca (note: our cars only have one) for the 1 pc ds...everything may bolt up and look/feel okay but without one you will be stressing the pinion...

Mikes_BLK_GT

You can either adjustable upper or lowers you dont need both.

howarmat

either works, you can get by with adjustable LCAs on some installs, sometimes you will need an upper also.