You may remember...
Thread Starter
2nd Gear Member
Joined: Aug 2005
Posts: 155
From:
You may remember...
...a few days ago I posted a thread about low oil pressure and horrible clacking noises coming fromthe heads after I installed headers. Well, it turns out that it wasthe oil sending unit has gone out! Nothing to do withthe headers just highly coincidentel. It has caused the lifting of some ofthe valves!!
So I am kinda bummed, really don't have thetime for this, just an update.
Cooper
So I am kinda bummed, really don't have thetime for this, just an update.
Cooper
3rd Gear Member
Joined: Jun 2007
Posts: 890
From: Danville, VA
RE: You may remember...
Uhhhhhhh,
If you have noise in the valvetrain, then you have more issues than just a sending unit going out. A sending unit just reads the oil pressure, it has no affect on it, and should have no effect to the valvetrain--it would just make the guage read wrong.
If you have noise in the valvetrain, then you have more issues than just a sending unit going out. A sending unit just reads the oil pressure, it has no affect on it, and should have no effect to the valvetrain--it would just make the guage read wrong.
3rd Gear Member
Joined: Nov 2006
Posts: 671
From:
RE: You may remember...
ORIGINAL: D_Gusler
Uhhhhhhh,
If you have noise in the valvetrain, then you have more issues than just a sending unit going out. A sending unit just reads the oil pressure, it has no affect on it, and should have no effect to the valvetrain--it would just make the guage read wrong.
Uhhhhhhh,
If you have noise in the valvetrain, then you have more issues than just a sending unit going out. A sending unit just reads the oil pressure, it has no affect on it, and should have no effect to the valvetrain--it would just make the guage read wrong.
Thread
Thread Starter
Forum
Replies
Last Post