400hp 281ci 3v Naturally Aspirated POSSIBLE?
06-12-2009, 07:57 PM
#11
5th Gear Member
Join Date: Mar 2006
Location: ATL
Posts: 2,955
You didn't look very hard. Like moosestang said, there have been SEVERAL threads on this subject already. The answer is definitive. It can't be done without going inside the engine. Even after going in the engine, it is FAR more cost effective to just slap on a blower.
06-12-2009, 09:20 PM
#13
2nd Gear Member
Join Date: Dec 2008
Location: NY
Posts: 390
I didn't bother to read any of the replies but it's VERY possible. CAI, CMDP, long tube headers (even with cats) good set of mufflers, a N/A set of cams, the new FRPP twin 62mm throttlebody and most importantly a really really good tune and you'll make more then 400 bhp maybe around 450
06-12-2009, 09:23 PM
#14
5th Gear Member
Join Date: Mar 2006
Location: ATL
Posts: 2,955
I didn't bother to read any of the replies but it's VERY possible. CAI, CMDP, long tube headers (even with cats) good set of mufflers, a N/A set of cams, the new FRPP twin 62mm throttlebody and most importantly a really really good tune and you'll make more then 400 bhp maybe around 450
06-12-2009, 09:25 PM
#15
5th Gear Member
Join Date: Mar 2006
Location: ATL
Posts: 2,955
06-12-2009, 09:46 PM
#16
Retired Mod
Join Date: Jan 2007
Location: Long Island, NY
Posts: 7,658
Last edited by Stkjock; 06-12-2009 at 09:59 PM.
06-12-2009, 09:53 PM
#17
5th Gear Member
Join Date: Aug 2006
Location: Near Wash. DC Posts: 13,541
Posts: 2,497
Furthermore 400 hp is easily possible if you include things like the C&L intake manifold and an electric water pump to a basics full mod list with cams. That's not even stretching it.
343 RWHP is 404 flywheel hp, that's actually more than is being asked. He could shoot for sizably more if he wanted.
06-12-2009, 10:07 PM
#18
Retired Mod
Join Date: Jan 2007
Location: Long Island, NY
Posts: 7,658
