Boomtubes on. Rattling, banging, need help
09-17-2009, 11:40 PM
#11
Thread Starter
Join Date: Aug 2009
Location: MA
Posts: 23
Thanks for the help. It turned out to be a hanger issue after all though. This forum is great!
09-18-2009, 12:16 AM
#12
4th Gear Member
Join Date: Aug 2008
Location: Mississippi
Posts: 1,679
you might have to go back again...
Thought mine was fixed, but it wasn't. It was better, but not fixed. I removed the hangers that were getting rubbed and grinded some material off of them to get even more clearance.
Prolly coulda hammered them again, but I don't have a lift and lack, um, wrist strength to do that laying on the ground.
Thought mine was fixed, but it wasn't. It was better, but not fixed. I removed the hangers that were getting rubbed and grinded some material off of them to get even more clearance.
Prolly coulda hammered them again, but I don't have a lift and lack, um, wrist strength to do that laying on the ground.
09-18-2009, 03:18 PM
#13
Thread Starter
Join Date: Aug 2009
Location: MA
Posts: 23
you might have to go back again...
Thought mine was fixed, but it wasn't. It was better, but not fixed. I removed the hangers that were getting rubbed and grinded some material off of them to get even more clearance.
Prolly coulda hammered them again, but I don't have a lift and lack, um, wrist strength to do that laying on the ground.
Thought mine was fixed, but it wasn't. It was better, but not fixed. I removed the hangers that were getting rubbed and grinded some material off of them to get even more clearance.
Prolly coulda hammered them again, but I don't have a lift and lack, um, wrist strength to do that laying on the ground.
Thread
Thread Starter
Forum
Replies
Last Post
