Project no hands **56K Warning Now**
03-16-2008, 09:05 PM
#553
6th Gear Member
Thread Starter
Join Date: Sep 2006
Location: Regina Beach, Sask
Posts: 9,991
RE: Project no hands
Still waiting[&o][&o][&o][&o][&o]
Last day of school before easter break is Wed. Plan on driving the car home eith that day or thursday
then body work starts[8D]
03-17-2008, 07:37 PM
#557
6th Gear Member
Thread Starter
Join Date: Sep 2006
Location: Regina Beach, Sask
Posts: 9,991
RE: Project no hands
Yeah. I'm so happy I checked the car the other day and there are only 4 places with rust coming back, so I plan on sanding the whole car down, straight. then seal it, then put sandable primer (high build) and sand till its all 100% SMOOTH!!!! then paint in a few weeks
I checked the car the other day and there are only 4 places with rust coming back, so I plan on sanding the whole car down, straight. then seal it, then put sandable primer (high build) and sand till its all 100% SMOOTH!!!! then paint in a few weeks
03-18-2008, 10:45 PM
#560
6th Gear Member
Thread Starter
Join Date: Sep 2006
Location: Regina Beach, Sask
Posts: 9,991
RE: Project no hands
Ok guys, after thinking and more thinking. I need your help (again...)
Should I strip my car 100% and start over? cure everything and know what I have to begin with? or should I just grind down where the rust is? anyways I know all the trim and windows are coming out before I roll it into paint.
So what should I do? Strip it all to metal and seal the whole car? or only seal where the rust is (sandblasting and using a wire wheel) then sanding the whole car straight?
Should I strip my car 100% and start over? cure everything and know what I have to begin with? or should I just grind down where the rust is? anyways I know all the trim and windows are coming out before I roll it into paint.
So what should I do? Strip it all to metal and seal the whole car? or only seal where the rust is (sandblasting and using a wire wheel) then sanding the whole car straight?