5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

Intake Manifolds Trick, Edel, PP, or GT-40

Thread Tools
 
Search this Thread
 
Old Mar 23, 2006 | 01:49 PM
  #21  
ikeybmg's Avatar
ikeybmg
5th Gear Member
 
Joined: Feb 2006
Posts: 3,915
From: Southwest VA.
Default RE: Intake Manifolds Trick, Edel, PP, or GT-40

edelbrock performer...
Old Mar 23, 2006 | 01:58 PM
  #22  
stanglx2002's Avatar
stanglx2002
6th Gear Member
 
Joined: Feb 2005
Posts: 5,205
From:
Default RE: Intake Manifolds Trick, Edel, PP, or GT-40


ORIGINAL: ikeybmg

edelbrock performer...
+1
Old Mar 23, 2006 | 03:46 PM
  #23  
88BlueGT's Avatar
88BlueGT
6th Gear Member
 
Joined: Sep 2005
Posts: 15,042
From: Hamilton, NJ
Default RE: Intake Manifolds Trick, Edel, PP, or GT-40


ORIGINAL: Twister


ORIGINAL: dsum14

The ads will usually tell you the hp increases, but that is at the flywheel, not at the rear wheels.
and the maximum possible, not all engines will get that dramatic of an increase....This intake can make up to 70hp over a stock intake...what they don't say is that engine has AFR's and a big bump stick
Exactally!
Old Mar 23, 2006 | 10:51 PM
  #24  
dsum14's Avatar
dsum14
2nd Gear Member
 
Joined: Jan 2006
Posts: 339
From:
Default RE: Intake Manifolds Trick, Edel, PP, or GT-40

It's really up to you. People are partial to what they have.
Old Mar 23, 2006 | 11:27 PM
  #25  
wjw61287's Avatar
wjw61287
1st Gear Member
 
Joined: Mar 2006
Posts: 88
From:
Default RE: Intake Manifolds Trick, Edel, PP, or GT-40

I say trickflow all the way
Old Mar 24, 2006 | 01:17 AM
  #26  
Twister's Avatar
Twister
5th Gear Member
 
Joined: Jan 2006
Posts: 2,645
From: So-Cal
Default RE: Intake Manifolds Trick, Edel, PP, or GT-40


ORIGINAL: wjw61287

I say trickflow all the way
I say that all except for the PP are compairable to each other, SO, the Trick Flow is the best bang for the buck since it is the cheapest
Old Mar 24, 2006 | 01:22 AM
  #27  
Stevens91gt's Avatar
Stevens91gt
5th Gear Member
 
Joined: Jan 2006
Posts: 4,053
From:
Default RE: Intake Manifolds Trick, Edel, PP, or GT-40

..street heat
Old Mar 24, 2006 | 03:11 AM
  #28  
crazyhorse's Avatar
crazyhorse
3rd Gear Member
 
Joined: Feb 2005
Posts: 854
From:
Default RE: Intake Manifolds Trick, Edel, PP, or GT-40

TRICK FLOW INTAKE & TRICK FLOW HEADS & ETC. GO WITH THE FLOW.
Old Mar 24, 2006 | 05:55 AM
  #29  
AdamB's Avatar
AdamB
2nd Gear Member
 
Joined: Mar 2006
Posts: 152
From: PA
Default RE: Intake Manifolds Trick, Edel, PP, or GT-40

Well, since I purchased my car used and it came with it... I'd have to say the Edelbrock performer!!

Seriously, with my mods and stock injectors (maxed out) my car dyno'ed 305.2 rwhp. Now that I've ordered some new injectors and some other goodies, my rwhp should go up a few
Old Mar 25, 2006 | 12:49 AM
  #30  
silver91gt's Avatar
silver91gt
5th Gear Member
 
Joined: Mar 2005
Posts: 3,195
From:
Default RE: Intake Manifolds Trick, Edel, PP, or GT-40

edelbrock rpm II,



All times are GMT -5. The time now is 10:19 PM.