Replacing Doors
03-29-2006, 11:35 AM
#13
6th Gear Member
Thread Starter
Join Date: Sep 2005
Location: Hamilton, NJ
Posts: 15,042
RE: Replacing Doors
OK well back to the real topic... is there anything that I should replace? What do people usually replace when their door sags? I know there is stuff I should replace..... someone tell me now!! 
03-29-2006, 11:57 AM
#17
6th Gear Member
Thread Starter
Join Date: Sep 2005
Location: Hamilton, NJ
Posts: 15,042
RE: Replacing Doors
LoL well I know nothing about both so were on the same page Since noone is answering me I guess I am just going to find everything thats on the door and replace it 
Since noone is answering me I guess I am just going to find everything thats on the door and replace it
03-29-2006, 12:17 PM
#19
6th Gear Member
Thread Starter
Join Date: Sep 2005
Location: Hamilton, NJ
Posts: 15,042
RE: Replacing Doors
I KNOW!!! I am very PO'd. I finally found my "go to guy". Cool guy, does everything, gets parts VERY cheap, cheap, and works on stangs for a living. He will most likley be the one doing my body work and all my welding next month (front rad support, floor pans, roof, patching holes in motor bay, etc.)
03-29-2006, 03:52 PM
#20
3rd Gear Member
Join Date: Nov 2005
Location:
Posts: 542
RE: Replacing Doors
when i replaced my door, it sagged. so i put a shim in between where the hinge and door met.. shuts fine and doesnt sag. this task is a lot easier with two people. 1 holding the door, the other bolting.