boss429

ok first question, how big is a stock MAF meter?

second question, does anyone make a MAF conversion for my 88

with a larger than stock MAF meter?

and is there anything bad about having say, injectors that are too big, too big of a MAF meter, throttle body, etc?

i plan on later mods, but i dont wanna have to do the intake **** more than once.

boss429

ok whats the deal,
im beign ignored lol

primetime5.0

just splice into the old harness for the conversion, so buy some wire, a maf, and google it for the how to's

Black Snake

https://mustangforums.com/m_842395/tm.htm

boss429

what the heck,
so if you buy like a conversion kit from FMS
you have to do all that junk?

primetime5.0

dont waste your money on that, splice into the original, its a lot cheaper

boss429

ok, id rather pay a couple extra bucks and not be splicing wires and junk.
i know its not that difficult i just dont wanna get into it.

is there another way, like is this ford kit plug and play?

Black Snake

Ill tell you what You have to do. I been there done that.

Go to a junk yard and pick up these parts.

A. Computer
B. Maf sensor and plug
C. Tubeing ( if you have CAI skip this)

Then got to your auto parts store and get these.

A. 12g Red wiring
B 12g Black wiring
C. 12g Brown wiring
D. 12g blue wiring

Fallow above directions (splicing wires in and moving 2 pins) and your done.

boss429

ok so could i do the exact same thing, but with a larger MAF meter.
and what is the stock size?
and id still like to know whats involved in the FMS installation.

Black Snake

Stock maf is 58mm or 60mm I cant remember.