How to set idle?
Thread Starter
I ♥ Acer
Joined: Nov 2005
Posts: 479
From: Annapolis, Maryland
How to set idle?
Is there anyway to really set the idle on my car? I know it's computer controlled, so I wasn't sure if there was a manual way to do it or not.
The reason I'm asking is because on the installation instructions on the bbk pullies, it says to set the idle at 750-800 rpm.
The reason I'm asking is because on the installation instructions on the bbk pullies, it says to set the idle at 750-800 rpm.
I ♥ Acer
Joined: Feb 2006
Posts: 2,039
From:
RE: How to set idle?
stock idle is around there anyway
ive heard u adjust it by turning the screw under the tb but u also have to reset the tps voltage or something like that? sorry im not too technical just going off of what ive read here in the past
hopefully someone else can chime in
ive heard u adjust it by turning the screw under the tb but u also have to reset the tps voltage or something like that? sorry im not too technical just going off of what ive read here in the past
hopefully someone else can chime in
2nd Gear Member
Joined: May 2006
Posts: 329
From: Dallas
RE: How to set idle?
yep, he's right. adjust the screw under the throttlebody per These Instructions and then continue on to step 4 to adjust TPS voltage (set it anywhere between .8 and 1.0vdc).
Thread
Thread Starter
Forum
Replies
Last Post