Some new parts installed (pics)
#1
Some new parts installed (pics)
I finally figured out a way to plumb in the fuel supply and where to stick the nozzle. What you think look good or like poop?
[IMG]local://upfiles/29088/210F5DADD6DA4A62817F2B6478850DBF.gif[/IMG]
[IMG]local://upfiles/29088/EB2DFF53BCD343A99E565F4ADB6CA486.gif[/IMG]
[IMG]local://upfiles/29088/210F5DADD6DA4A62817F2B6478850DBF.gif[/IMG]
[IMG]local://upfiles/29088/EB2DFF53BCD343A99E565F4ADB6CA486.gif[/IMG]
#6
RE: Some new parts installed (pics)
With a dry shot you need to spray it before the mass air meter so the computer will add more fuel to prevent lean issue's.
ORIGINAL: Scout2232
Yea I have a dry setup kinda like that I'm looking to install soon and I think that's how I would pretty much do it.
Yea I have a dry setup kinda like that I'm looking to install soon and I think that's how I would pretty much do it.
#7
RE: Some new parts installed (pics)
Its a wet shot. I wanted as close to the intake as I could get it. I really dont wont the fuel to have to travel the CAI tube. Just to be safe. Atleast this way it sprays directly into the intake with no turns or restriction.
ORIGINAL: 92hatchLX
I would get the C&L tru-flow pipe, it's got a boss on it for nitrous.
I would get the C&L tru-flow pipe, it's got a boss on it for nitrous.
#8
RE: Some new parts installed (pics)
I beleive that the boss is on the angle of the pipe so it's a straight shot in. Here's a link, http://www.cnlperformance.com/inlet.html , take a look.