Pics Of The New Motor, WOOOHOOO
07-30-2006, 12:57 PM
#24
2nd Gear Member
Thread Starter
Join Date: Mar 2006
Location: Rock Hill, South Carolina
Posts: 198
RE: Pics Of The New Motor, WOOOHOOO
ORIGINAL: Crump_4
custom 308, all forged inturnals 11:1 compression, comp cams xe274hr cam 1.7 scorpian rollar rockers, procomp alum heads fully ported and polished, 2.050/1.60 valves, trickflow stud girdles in the heads, main girdle in the bottom high presure melling oil pump, victor jr. intake, Holley 650 DP, everything is fully balanced and bluprinted, MSD pro billet dizzy, MSD digital 6 plus ignition.....and so on.....just to much to list. It made 471.8 HP @ 5700RPM @ the Flywheel
ohh, and a 2500 stall converter w/ 3.73 gears backed by an AOD built like a brick ****house
custom 308, all forged inturnals 11:1 compression, comp cams xe274hr cam 1.7 scorpian rollar rockers, procomp alum heads fully ported and polished, 2.050/1.60 valves, trickflow stud girdles in the heads, main girdle in the bottom high presure melling oil pump, victor jr. intake, Holley 650 DP, everything is fully balanced and bluprinted, MSD pro billet dizzy, MSD digital 6 plus ignition.....and so on.....just to much to list. It made 471.8 HP @ 5700RPM @ the Flywheel
ohh, and a 2500 stall converter w/ 3.73 gears backed by an AOD built like a brick ****house
^these and its 471hp not 417
07-30-2006, 12:59 PM
#25
4th Gear Member
Join Date: Jun 2006
Location: texas
Posts: 1,082
RE: Pics Of The New Motor, WOOOHOOO
very nice specs... congrates... i was gonna get a apir of procomp heads,,but settled for edelbrock rpms 202/16 i race preped n ported them and so far it woke up my motor big time..
07-30-2006, 01:01 PM
#26
2nd Gear Member
Thread Starter
Join Date: Mar 2006
Location: Rock Hill, South Carolina
Posts: 198
RE: Pics Of The New Motor, WOOOHOOO
ORIGINAL: hellas85stang
very nice specs... congrates... i was gonna get a apir of procomp heads,,but settled for edelbrock rpms 202/16 i race preped n ported them and so far it woke up my motor big time..
very nice specs... congrates... i was gonna get a apir of procomp heads,,but settled for edelbrock rpms 202/16 i race preped n ported them and so far it woke up my motor big time..
Thanks, it took about 10 months to build but it was well worth the wait
07-30-2006, 01:01 PM
#27
6th Gear Member
Join Date: Jan 2006
Location: Laredo, TEXAS
Posts: 6,054
RE: Pics Of The New Motor, WOOOHOOO
ORIGINAL: Crump_4
^these and its 471hp not 417
ORIGINAL: Crump_4
custom 308, all forged inturnals 11:1 compression, comp cams xe274hr cam 1.7 scorpian rollar rockers, procomp alum heads fully ported and polished, 2.050/1.60 valves, trickflow stud girdles in the heads, main girdle in the bottom high presure melling oil pump, victor jr. intake, Holley 650 DP, everything is fully balanced and bluprinted, MSD pro billet dizzy, MSD digital 6 plus ignition.....and so on.....just to much to list. It made 471.8 HP @ 5700RPM @ the Flywheel
ohh, and a 2500 stall converter w/ 3.73 gears backed by an AOD built like a brick ****house
custom 308, all forged inturnals 11:1 compression, comp cams xe274hr cam 1.7 scorpian rollar rockers, procomp alum heads fully ported and polished, 2.050/1.60 valves, trickflow stud girdles in the heads, main girdle in the bottom high presure melling oil pump, victor jr. intake, Holley 650 DP, everything is fully balanced and bluprinted, MSD pro billet dizzy, MSD digital 6 plus ignition.....and so on.....just to much to list. It made 471.8 HP @ 5700RPM @ the Flywheel
ohh, and a 2500 stall converter w/ 3.73 gears backed by an AOD built like a brick ****house
^these and its 471hp not 417
07-30-2006, 01:08 PM
#29
6th Gear Member
Join Date: Jan 2006
Location: Laredo, TEXAS
Posts: 6,054
RE: Pics Of The New Motor, WOOOHOOO
ORIGINAL: Crump_4
not sure, I dont know how to calc. that. so people say 18% some say 20%. I'll know soon though I plan on putting it on a chassis dyno
not sure, I dont know how to calc. that. so people say 18% some say 20%. I'll know soon though I plan on putting it on a chassis dyno
