MustangForums.com

5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

sorry im still trying to understang.

Thread Tools
 
Search this Thread
 
Old 10-02-2006, 11:25 PM
  #1  
alec3369
2nd Gear Member
Thread Starter
 
alec3369's Avatar
 
Join Date: Nov 2005
Location:
Posts: 260
Default sorry im still trying to understang.
I really dont undersatng fully about the MAF sizes compared to TB sizes and injectors. My car has a 75mm MAF with a 65mm TB and 24lb injectors. Des think Sound all good so far? Also, everyone says my car doesnt need 24's , so i was thinking of putting in 19lb injectors. Will i have to change anything else if i change teh injectors to 19's?

THanks
alec3369 is offline  
Reply
Old 10-02-2006, 11:25 PM
  #2  
Stevens91gt
5th Gear Member
 
Stevens91gt's Avatar
 
Join Date: Jan 2006
Location:
Posts: 4,053
Default RE: sorry im still trying to understang.
well it sounds about right
and if you go to 19lbrs then yess

you will need to get a MAF calibrated for 19's
Stevens91gt is offline  
Reply
Old 10-02-2006, 11:31 PM
  #3  
alec3369
2nd Gear Member
Thread Starter
 
alec3369's Avatar
 
Join Date: Nov 2005
Location:
Posts: 260
Default RE: sorry im still trying to understang.
ok thank you
alec3369 is offline  
Reply
Old 10-02-2006, 11:35 PM
  #4  
Stevens91gt
5th Gear Member
 
Stevens91gt's Avatar
 
Join Date: Jan 2006
Location:
Posts: 4,053
Default RE: sorry im still trying to understang.
ya np man
Stevens91gt is offline  
Reply
Back to Subforum
5.0L (1979-1995) Mustang
View Next Unread
H/C/I




Advanced Search
Reply Closed Thread Share
Forum Jump

All times are GMT -5. The time now is 09:53 AM.