new fuel reg. having problems.
10-16-2006, 01:00 AM
#1
3rd Gear Member
Thread Starter
Join Date: Feb 2006
Location:
Posts: 761
new fuel reg. having problems.
got it installed and it ran fine until i drove it and came to a stop, then it dies. and now when i start it it surges and eventualy dies.
whats the fuel pressure supposed to be? and what else could be causing this?
whats the fuel pressure supposed to be? and what else could be causing this?
10-16-2006, 01:05 AM
#4
3rd Gear Member
Thread Starter
Join Date: Feb 2006
Location:
Posts: 761
RE: new fuel reg. having problems.
well the directions said to put it to 48 psi with the vacuum line off. could that be why it runs like ****?
how do i check for vacuum leaks? and what is cel? and i dont think it would be my maf cause it just started with the new regulator.
how do i check for vacuum leaks? and what is cel? and i dont think it would be my maf cause it just started with the new regulator.
10-16-2006, 01:11 AM
#7
The Rogue Mod
Join Date: Feb 2006
Location: Maryland Sucka's!!
Posts: 21,918
RE: new fuel reg. having problems.
ORIGINAL: 94Cobrakid16
well the directions said to put it to 48 psi with the vacuum line off. could that be why it runs like ****?
how do i check for vacuum leaks? and what is cel? and i dont think it would be my maf cause it just started with the new regulator.
well the directions said to put it to 48 psi with the vacuum line off. could that be why it runs like ****?
how do i check for vacuum leaks? and what is cel? and i dont think it would be my maf cause it just started with the new regulator.
10-16-2006, 01:29 AM
#8
3rd Gear Member
Thread Starter
Join Date: Feb 2006
Location:
Posts: 761
RE: new fuel reg. having problems.
check engine light only comes on after it dies. but thats normal i think. when its running no "cel"
now when i put it to 38 psi do i have the vacuum line disconnected or connected?
now when i put it to 38 psi do i have the vacuum line disconnected or connected?
