Dyno'd the Mustang on gas
10-20-2006, 08:04 PM
#21
Banned
Join Date: Dec 2005
Location: Lil' Rhody
Posts: 22,376
RE: Dyno'd the Mustang on gas
Kevinas... did anyone mention to you that you mounted your bottle backwards??? because you did.
the valve should be pointing towards the front of the car, of off to one side. you are going to cause problems with your nitrous kit when you car gets past 1/2 bottle. under acceleration
the valve should be pointing towards the front of the car, of off to one side. you are going to cause problems with your nitrous kit when you car gets past 1/2 bottle. under acceleration
10-20-2006, 08:17 PM
#22
6th Gear Member
Join Date: Jun 2006
Location: Maine
Posts: 5,693
RE: Dyno'd the Mustang on gas
ORIGINAL: AdderMk2
Kevinas... did anyone mention to you that you mounted your bottle backwards??? because you did.
the valve should be pointing towards the front of the car, of off to one side. you are going to cause problems with your nitrous kit when you car gets past 1/2 bottle. under acceleration
Kevinas... did anyone mention to you that you mounted your bottle backwards??? because you did.
the valve should be pointing towards the front of the car, of off to one side. you are going to cause problems with your nitrous kit when you car gets past 1/2 bottle. under acceleration
10-20-2006, 08:49 PM
#24
6th Gear Member
Join Date: Jun 2006
Location: Maine
Posts: 5,693
RE: Dyno'd the Mustang on gas
ORIGINAL: AdderMk2
apparently alot of people missed it... i just hope he doesnt think im flaming him and just fixes it
apparently alot of people missed it... i just hope he doesnt think im flaming him and just fixes it
10-20-2006, 10:23 PM
#25
3rd Gear Member
Join Date: Jan 2006
Location: Kentucky
Posts: 775
RE: Dyno'd the Mustang on gas
ORIGINAL: kevinas1214
Okay guys let me be the one to tell you...... if you see inflated numbers on the dyno that say 400 horsepower or more you need to respect them or call them out!!
Okay guys let me be the one to tell you...... if you see inflated numbers on the dyno that say 400 horsepower or more you need to respect them or call them out!!
10-20-2006, 10:26 PM
#26
4th Gear Member
Join Date: May 2006
Location: Scottsdale, AZ
Posts: 1,677
RE: Dyno'd the Mustang on gas
ORIGINAL: Dirty Sanchez
Some people have quite a bit more power than the numbers they claim. [8D]
ORIGINAL: kevinas1214
Okay guys let me be the one to tell you...... if you see inflated numbers on the dyno that say 400 horsepower or more you need to respect them or call them out!!
Okay guys let me be the one to tell you...... if you see inflated numbers on the dyno that say 400 horsepower or more you need to respect them or call them out!!
10-20-2006, 10:31 PM
#27
3rd Gear Member
Join Date: Jan 2006
Location: Kentucky
Posts: 775
RE: Dyno'd the Mustang on gas
ORIGINAL: SSKiller
Quit lying Dirty........tell us your "REAL" numbers.
ORIGINAL: Dirty Sanchez
Some people have quite a bit more power than the numbers they claim. [8D]
ORIGINAL: kevinas1214
Okay guys let me be the one to tell you...... if you see inflated numbers on the dyno that say 400 horsepower or more you need to respect them or call them out!!
Okay guys let me be the one to tell you...... if you see inflated numbers on the dyno that say 400 horsepower or more you need to respect them or call them out!!
10-20-2006, 10:37 PM
#29
3rd Gear Member
Join Date: Jan 2006
Location: Kentucky
Posts: 775
RE: Dyno'd the Mustang on gas
I haven't had it dyno'd with the new valve springs and more boost, but on the 6.80 run, which should have been high 6.60's - low 6.70's (blowing through the converter, and on the limiter at 594') it should be making about 525rwhp / 600rwtq.