92stang302

does any one know what exacly i have to do to put a 460 carberated motor or a 351w fi in a 1992 fox [sm=helpout.gif]

AdderMk2

thats two completely different swaps you are talking about..

If you are seriously interested in motorswaps contack jason (VRIStang) he has a website with a complete list of stuff you need to swap to a 351w

r.barn

pretty easy, there are parts and kits to do both.

351W will be easier than the big block 460

95 madness

New to this myself won't a 351w swap directly with a 302? I am looking at doing this with my 95. Will all the accessories and intake set up off a 302 go directly to a 351w?

SonicBlueFiveSlow

I think Summit sells a 460 swap kit for the fox if I'm not mistaken.

ratrap1964

I had a 85 that I put a 460/c6 in. Things you will need, Swap mounts, or motor plate, coresponding headers. Swap oil pan (some van pans are rear sump). Accessory brackets, depending on what you want. Driveshaft will have to be shortened, electric fan, a hood or scoop. You will have to either sump the fuel tank and run new line or get a 85 or earlier fuel pickup, carb car throttle cable. There is more nickel and dime stuff, but thats the major part.

Here are a couple of pictures of my old car.