MustangForums.com

5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

Clutch and flywheel for 351 with a T-5

Thread Tools
 
Search this Thread
 
Old 11-09-2006, 02:09 AM
  #1  
fatmatt88lx
1st Gear Member
Thread Starter
 
fatmatt88lx's Avatar
 
Join Date: Jul 2006
Location: NJ
Posts: 57
Default Clutch and flywheel for 351 with a T-5
Currently im building a 351 windsor for my 88GT.
can i use the clutch and flywheel for the 302 with the 10.5" clutch and flywheel?
When i was searching for clutches and flywheels on summit and jegs to get ideas they had an 11" for the 351 and i dont know if the 11" will fit in the T-5 bellhousing.
I know there is at least one kid out there like me who has no money left b/c its all in his car has done this swap and knows the cheap and best way to do this.

I need some suggestions...

fatmatt88lx is offline  
Reply
Old 11-09-2006, 02:17 AM
  #2  
90mustang5.8
I ♥ Acer
 
90mustang5.8's Avatar
 
Join Date: Aug 2006
Location: Saskatoon, SK, Canada
Posts: 4,921
Default RE: Clutch and flywheel for 351 with a T-5
351 + t-5 ..i hope u have a really strong rear end
90mustang5.8 is offline  
Reply
Old 11-09-2006, 02:19 AM
  #3  
primetime5.0
6th Gear Member
 
primetime5.0's Avatar
 
Join Date: Dec 2003
Location: United States
Posts: 9,587
Default RE: Clutch and flywheel for 351 with a T-5
351 + t-5 ..i hope u have a really strong rear end
?? hope you have a strong t-5, which none of them are strong..
primetime5.0 is offline  
Reply
Old 11-09-2006, 02:20 AM
  #4  
dimebag
6th Gear Member
 
dimebag's Avatar
 
Join Date: May 2006
Location: earleville md
Posts: 10,357
Default RE: Clutch and flywheel for 351 with a T-5
yea good luck w. that t5 lasting...my stock car killed mine... hope it goes better for you tho.. either way good luck
dimebag is offline  
Reply
Old 11-09-2006, 02:32 AM
  #5  
90mustang5.8
I ♥ Acer
 
90mustang5.8's Avatar
 
Join Date: Aug 2006
Location: Saskatoon, SK, Canada
Posts: 4,921
Default RE: Clutch and flywheel for 351 with a T-5
C4 is the way to go.....
90mustang5.8 is offline  
Reply
Old 11-09-2006, 02:35 AM
  #6  
primetime5.0
6th Gear Member
 
primetime5.0's Avatar
 
Join Date: Dec 2003
Location: United States
Posts: 9,587
Default RE: Clutch and flywheel for 351 with a T-5
tko baby!!
primetime5.0 is offline  
Reply
Old 11-09-2006, 02:38 AM
  #7  
90mustang5.8
I ♥ Acer
 
90mustang5.8's Avatar
 
Join Date: Aug 2006
Location: Saskatoon, SK, Canada
Posts: 4,921
Default RE: Clutch and flywheel for 351 with a T-5
don't listen to him^ between u and me...C4!!!!!!!!!!! [8D]
90mustang5.8 is offline  
Reply
Old 11-09-2006, 02:41 AM
  #8  
primetime5.0
6th Gear Member
 
primetime5.0's Avatar
 
Join Date: Dec 2003
Location: United States
Posts: 9,587
Default RE: Clutch and flywheel for 351 with a T-5
just buy one of these!

primetime5.0 is offline  
Reply
Old 11-09-2006, 02:44 AM
  #9  
BlackLX
4th Gear Member
 
BlackLX's Avatar
 
Join Date: May 2006
Location:
Posts: 1,576
Default RE: Clutch and flywheel for 351 with a T-5
^How much did that set you back?
BlackLX is offline  
Reply
Old 11-09-2006, 02:44 AM
  #10  
90mustang5.8
I ♥ Acer
 
90mustang5.8's Avatar
 
Join Date: Aug 2006
Location: Saskatoon, SK, Canada
Posts: 4,921
Default RE: Clutch and flywheel for 351 with a T-5
shifting more than twice *throws up* lmao
90mustang5.8 is offline  
Reply



Advanced Search
Quick Reply: Clutch and flywheel for 351 with a T-5


Reply Closed Thread Share
Forum Jump

All times are GMT -5. The time now is 05:54 AM.