TGSXR

This is becoming a pain in the ****.

According to my manual, replacing the heater motor is simple. No such luck. Anyone replaced the heater motor in an 87 and up GT? Do I have to take the dash apart, as it looks??


Any help would be appreciated!

Tyler

primetime5.0

it slides out from under the dash its not to hard

TGSXR

I was thinkin about that, but I couldn't see how it would clear the firewall. Let alone get the mounting screws out...

primetime5.0

I think there is only 3 its comes off seperately from the heater core area

wine_maker

I think he dont know to take the heater box out then take the fan off it (maybe) yes maybe No

TGSXR

I think thats the case here.... how to take the heater box out?

wine_maker

read well LOL

Get a big bar and the biggest hammer you can find drive the bar in>>>>>> the groung
save the hammer to hit the next person that walks up and ask what you are doing.
The bar is to lean on and look at the stang when you get done

Then

Remove glove box lid then the heater box is held in with I think 3 or 4 small screws
remove them the box will be lose it will take some moving around but it will come out then you can get to the fan motor about 3 hr for a first timer not to bad.
( the glove box is not required but makes it easer I think

TGSXR

I pulled as many screws as i could find under there, didn't seem like it wanted to slide out. I'll have to try again.

Any more tips?

wine_maker

give me a few min i got a box in the gorage need to go look at it i will try to get you a pic if i can

TGSXR

THANK you!