canman87

I was told that you could get 600rwhp out of a 302. is that true? or would i have to get a 351w? and what would i have to do to get that power...

musclemustang94

LOTS of boost, after market block, a cam with lots of lift and duration, and some gnarly huge heads.

PX429

do you want horsepower or do you want speed?

musclemustang94

sounds like he wants to get killed haha

FullAuto

My combo I sold last month:

3.25" stroke, standard bore Dart block, Twisted Wedge heads, Performer RPM, .544/.576 224/230 114 hyd. roller, Novi 2000 @ 13psi, AOD on 93 octane. It made 602rwhp untuned with the a/f off the chart rich from 3200rpm up. That's not an excessive heads, cam or boost in my book. It was matched well though.

canman87

if you all think that my mark is to high... then what would been a good mark on hp?

87WSP5.0

Good heads, intake and camshaft + Turbo. You will need a stronger block though.

Stang_SHO

hopes and dreams.

chath_brick

your stock block will never handle it, and if you get a new block then you might as well go with more cubes.

r.barn

I would shoot for 400-450rwhp, easily done and stock block should handle it.

remember 600rwhp is well over 700hp engine .......... thats A LOT of power.