BOSS 302 FOR 2009!!!!
#1
#2
RE: BOSS 302 FOR 2009!!!!
A few thoughts come to mind.
1. Why such low HP figures.
2. Why not the 351 .
3. How the hell can you get 500hp out of a 302, the block will split, unless totally redesigned.
4. there is no way, id pay that much for 500 hp, id just build my own dam motor.
5. is this pushrod or OHC crap?[>:]
6.A carb is on top , not my favorite.
a fully built unit running between $5k and $10k.
1. Why such low HP figures.
2. Why not the 351 .
3. How the hell can you get 500hp out of a 302, the block will split, unless totally redesigned.
4. there is no way, id pay that much for 500 hp, id just build my own dam motor.
5. is this pushrod or OHC crap?[>:]
6.A carb is on top , not my favorite.
#3
RE: BOSS 302 FOR 2009!!!!
ORIGINAL: aode06
A few thoughts come to mind.
1. Why such low HP figures.
2. Why not the 351 .
3. How the hell can you get 500hp out of a 302, the block will split, unless totally redesigned.
4. there is no way, id pay that much for 500 hp, id just build my own dam motor.
5. is this pushrod or OHC crap?[>:]
6.A carb is on top , not my favorite.
A few thoughts come to mind.
a fully built unit running between $5k and $10k.
1. Why such low HP figures.
2. Why not the 351 .
3. How the hell can you get 500hp out of a 302, the block will split, unless totally redesigned.
4. there is no way, id pay that much for 500 hp, id just build my own dam motor.
5. is this pushrod or OHC crap?[>:]
6.A carb is on top , not my favorite.
#4
RE: BOSS 302 FOR 2009!!!!
I have seen people hit close to 600rwhp on stockers.... good luck making it last though. I did not read the article but Im pretty sure its not what your thinking of.. I dont think they are "stock 5.0 blocks" ... any comments?
#5
RE: BOSS 302 FOR 2009!!!!
there not stock blocks..LMFAO* isn't it amazing how ford has come back to the 5.0....4.6 are a piece of ****......they better do something as sales are falling and after dodge and chevy putthier cars on the lot mustangs would be sitting thier with dust on them
#6
RE: BOSS 302 FOR 2009!!!!
naw i didnt read this from an article, my dad told me. he's worked for ford for over 30 years and he always gets newsletters and programs from ford. i know that i post about him a lot but he really knows what he is talkin about. hes told me that ford can make stock 302 blocks pack some real big hp.
#10
RE: BOSS 302 FOR 2009!!!!
I think this is the block they are using:
http://www.fordracingparts.com/parts...tKeyField=9085
Also if you go here:
http://www.fordracingparts.com/jumppages/boss.asp?x=1
You can see the engines they are going to release in early 2007.
Swirl
http://www.fordracingparts.com/parts...tKeyField=9085
Also if you go here:
http://www.fordracingparts.com/jumppages/boss.asp?x=1
You can see the engines they are going to release in early 2007.
Swirl